1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Crimping tool |
1 x | Copier 2x20 cm pcs |
1 x | Digital weight, angle and balance meter BASIC |
1 x | 25 mm Sandpaper file |
1 x | 1,5x50 mm allen screwdriver |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Ball Link Plier |
1 x | 2,0x50 mm allen screwdriver |
1 x | 100g Flux Paste for Silver Solder |
1 x | Copier 5x20 cm pcs |
1 x | Cut tube |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
2 x | Fresa corte diamante Ø 1.4mm (bola) |
2 x | |
2 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Ball Link Plier |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
2 x | 55% silver electrodes (2 pcs) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | 30 cm BEC cable (male) |
1 x | 3 LiPo XH>EH adapter |
1 x | DPSI Ampere battery backer |
1 x | 30 cm BEC cable (female) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Connector CAN 15 |
1 x | 5 LiPo XH>EH adapter |
2 x | CC 05 |
3 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
3 x | CC 01 |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Connector Sub-D 2+5 Female |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Circlick securite |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | CM-3 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | USB Mini Camera endoscope |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | Horn with ball 40x30 |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Cable control set |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn DUBRO 1/2A |
1 x | 6 mm M3 variable inclined horn |
1 x | Adjustable brass horn threaded M3 |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 5 mm M2 variable horn |
1 x | 6 mm aluminium horn with patella |
1 x | Horn for flap control (1 pcs) |
1 x | ExtraCA Top |
1 x | KAVAN Threadlocker - Blue 10ml |
1 x | Sealing Iron Sleeve STD |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | EC-Cutter |
2 x | Crimping tool |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Heli blades angle measurer |
1 x | Sandpaper file 13 mm |
3 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | SPARK Switch 7.4v |
1 x | SWTU2 switch |
1 x | SPARK Switch 5.9v |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Indoor Brushed motor kit |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | |
1 x | SPS 70V 140/280 A |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | PowerBox SparkSwitch RS |
1 x | GPS Logger Dymond |
1 x | MAMBO 17 |
1 x | TrainerCord (master-learner) |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | EWC6 40 cm wing connector |
1 x | Swing 1000 |
1 x | USB interface ALTIS |
1 x | DPSI RV Mini 5 (2008) |
1 x | Male Prolonger TP 4/5S |
1 x | Servo-V-Limiter 5.2V |
1 x | 2,5x60 mm allen screwdriver |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | TMM 1210-3S heli |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | DPSI OCP Overload protection |
1 x | Extension 6 lipos XH > EH |
1 x | PSC 5 |
1 x | Servo Metal Horn 15.5 mm MKS |
2 x | Cierva C30 spanish decoration Stickers |
2 x | Balls 4 mm |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Raer wall |
1 x | Blade Holder (3 blades) |
2 x | Head lower part New |
2 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
2 x | Servo MKS HV69 |
1 x | Pilot LA 500 |
1 x | 4 blades set |
1 x | Bearing 3x6x2,5 |
1 x | Fuselage Autogyro RAINBOW |
1 x | LA500 pilot-seat set |
1 x | Autogyro Cierva C30 Spain |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Piñon motor rotor LA-500 |
1 x | LA500 housing-lower cyclic |
1 x | Servo AN-8 HBA |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
2 x | Blades 330mm |
1 x | 3 blades set |
1 x | LA500 ciclic lever |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | LA500 freewheel bearing |
1 x | LA500 Blades |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Motor DLE 200cc Premium Muffler |
1 x | LOWER TOW HOOK |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ABS tube 8.0x7.0x1000 mm |
2 x | SE Ring 330 mm (4 pcs) |
2 x | Ring 320 mm length (5 pcs) |
2 x | Marker ties (20 pcs) |
2 x | SE Ring 300 mm (2 pcs) |
1 x | Tape GFK 25 mm |
2 x | Tape GFK 50 mm |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Epoxy 10 min 190g |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Epoxy 30 min. 200g |
2 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
2 x | Epoxy 5 min. 500 g (Resin) |
1 x | Epoxy 40 min (Hardener). 1 Kg |
2 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
2 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
2 x | Epoxy 40 min (Resin). 25Kg |
2 x | Epoxy L 40 min. 10 kg (Resin) |
2 x | Epoxy 40 min (Hardener). 10Kg |
1 x | PPS-4D Propeller |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | DPSI 2001 RV |
1 x | JETImodel Addcap 1640 |
2 x | Hacker X-Pro USB interface V2 |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Extension 2/3 lipos JST - JST/C |
1 x | Extension 5 lipos JST - JST/C |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | Cooler motor type 280 |
1 x | Cooler motor type 150 |
1 x | Charger LiPo Charger4 |
1 x | DPSI Ampere & Voltage bundle |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Small Crow DLE-170M |
1 x | Motor DLE 170 M- Paramotors |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Male connector for 6 pines AWG |
1 x | EWC3 40 cm wing connector |
1 x | JETImodel DPS 40 |
1 x | Blade holder lower |
1 x | Servo MKS HV747 |
1 x | Wheel keeper washer |
1 x | Head runner |
1 x | Servo MKS HV 777A+ |
1 x | Head spacer |
2 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
2 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Silent-blocks DLE 170M |
1 x | Motor DLE 200cc Std |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Foil for sticking flaps and ailerons |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Spikes Band (5 m) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | 20x200 mm battery rings |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Futaba 38 mm servo arm |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | Hitec 38 mm servo arm |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Gates hinge |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Propeller APC 10x4.7 SF |
1 x | Hitec 25 mm servo arm with ball link |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Propeller APC 11x3.8 SF |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Propeller APC 12x3.8 SF |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 52 mm servo arm |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Cable with accesories |
1 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | GameCommander USB Universal |
1 x | Micro Crystal RX 35.010 Ch 61 |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | Servo NARO Max Std |
1 x | Round flex hinge (12 uds) |
|
17,081.94EUR |