1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
2 x | ABS I Strip 10x5x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
2 x | Round Rod 6,0x1000 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Shirt Hispano Aviación |
2 x | Softshell Hispano Aviación |
2 x | Vest clothes Hispano Aviación |
1 x | Cap Hispano Aviación |
1 x | Oracover light Grey 2m |
1 x | Oratex Antik 2m |
1 x | Oracover Azul 2 m |
1 x | Ply-Span 450x600/13g Orange |
1 x | Oracover CARBON Metalic 1 m |
1 x | Oracover CHROME 2m |
1 x | Oracover Black 10 m |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
3 x | Straightened rod Ø 5.5 mm x 1000 mm |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Straightened threaded rod M2-1m |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | RH long aluminium horn (2pcs) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 6 mm aluminium horn with patella |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Small aluminium horn red (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn 5/20 with M2 Bearing |
2 x | 20 mm carbon horn |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
2 x | Small aluminium horn blue (2pcs) |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Horn 5/10 with M2 Bearing |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Cable with accesories |
1 x | Cable control set |
2 x | 6 mm red aluminium threaded horn with patella |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Horn with ball 55x40 |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Cable coupler M3 (10 uds) |
1 x | Round Rod 2,5x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | SIG Coverall 1.2x1.8 m |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
2 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Black large kwik link (10 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
2 x | Size "M" motor holder for class 400 |
2 x | Motor mount for 1 m models |
2 x | Size "L" motor holder for class 600 |
2 x | Hacker A30-S Radial Set |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Conector MR-60 (pareja) |
1 x | Conector JR Servo male (50 pcs) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Control horn long w/ball |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Crystal Universal RX 35.040 Ch 64 |
2 x | Cooler motor type 280 |
1 x | Cooler motor type 150 |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Coupling bush 5 - 5 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | |
1 x | Receiver bed (Blue) |
1 x | Size "M" motor holder for class 600 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Suncover 100cc Red |
1 x | 3,2 mm Prop Adapter M8 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Bidule 111 3000 mm Canopy |
1 x | Futaba 38 mm servo arm with ball link |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo GO-02 Digital 1.8g |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Astra wing Joinner (Top Model) |
1 x | Bidule 55 2460 mm Cabina |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Ply-Span 450x600/13g Blue |
1 x | Complet landing gear |
1 x | LA500 ciclic lever |
1 x | Oracover Yellow CUB 2 m |
1 x | LA500 pre-rotation gear |
1 x | Oratex Natural White 2m |
1 x | Oratex Silver 2m |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | LED wire (rojo - 2pcs) |
1 x | Fiberglass motor-holder for electric motors |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Motor Mount for Multiplex FunJet |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Bearings for motor HACKER C50 |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Central support Speed 280 |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Cooler motor type 300 |
1 x | Micro clevis (10 uds) |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Electric coversion set |
1 x | Ferrita 14x8x5.5 mm |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Size "M" motor holder for class 400 |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | A60 Motor Mount Alu complete set |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | 10 mm gas motor standoff |
1 x | Motor mount for 1200 mm models |
1 x | Metal clevis M3 (10 uds) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Frontal support Speed 280 |
1 x | Fan for A60 |
1 x | Round Rod 1.0x3.5 cm |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Frontal support Speed 400/480 |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Metal clevis M2 (10 uds) |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Frontal support Speed 600 |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Motor mount M |
1 x | Ball joint long |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | 4 mm Prop Adapter M8 |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Canopy Sweet / Siesta |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Propeller 9x7 SlowFlyer |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | 11 mm wing servo holder |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | BULLIT Wing 840 mm |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | USB programador GO servos |
1 x | BULLIT Wing 1095 mm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Challenger ARF (Top Model) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Futaba 52 mm servo arm |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Futaba 20 mm servo arm |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | DIVA cabin cruiser |
1 x | 39,0 mm propeller (left propeller) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn mando small (2 pcs) |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 45 mm flag mast |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | 75 mm |
1 x | ALPHA 1000mm BL ARTR |
1 x | 10 mm portholes (10 pcs) |
1 x | 29,0 mm propeller (left propeller) |
1 x | 12 mm portholes (10 pcs) |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | "S" set for boats |
1 x | 10 mm dogdrive props |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Fishing boat Jule Fischkutter |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
|
6,272.66EUR |