1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
2 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Long ball link M1.6 (6 uds) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Joint with bearing M2 22x5,5 |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Short ball link M3 (6 uds) |
1 x | 30 cm BEC cable (male) |
2 x | CC 03 |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | BEC 3A FOXY |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | 3 LiPo XH>EH adapter |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Connector Sub-D 2+5 Female |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Adapter lead MPX/XT60 |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | BALSA triangular 6x6x1000 mm |
2 x | 2 LiPo XH>EH adapter |
2 x | 4 LiPo XH>EH adapter |
1 x | CC 02 |
1 x | SERVO HOLDER |
3 x | LOWER TOW HOOK |
1 x | Towing hook <3m |
2 x | Towing hook |
3 x | ABS angle 5,0x5,0x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
2 x | Profile ABS Square 1 x 1000 mm |
2 x | ABS angle 3,0x3,0x1000 mm |
2 x | L-Connector 1.0 mm x 1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
4 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
3 x | Profile ABS Square 4 x 1000 mm |
2 x | ABS angle 10,0x10,0x1000 mm |
3 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
2 x | Rubber profile 10-2 mm 2M |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Conector JR Servo female (50 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Horn 5/20 with M2 Bearing |
1 x | 20 g tin paste |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Connectors MPX male |
2 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | 3 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
2 x | Antenna holder bracket double |
2 x | Hardener P-25, canister 2.5Kg |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
3 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Switch Cap M (silver) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Metal clevis M3 (10 uds) |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Cable coupler M2 (10 uds) |
1 x | COPILOT Multiplex |
1 x | Ball link M2,5 (10 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
2 x | Pulley brass 6/1,5 (2 pcs) |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Long ball link M2 (6 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Round Rod 1.0x3.5 cm |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Short ball link M2 (6 uds) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Arnes cruzado Confort de Luxe PROFI |
2 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Potenciometro micro |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Angled clevis with threaded rod M3 |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Ball link M3 RPA's-UAV's |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
2 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Blind nut M5 (4 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Reflector 18 mm (2 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Combo lighting module with covering drop shape |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | PowerBox SparkSwitch RS |
1 x | SPARK Switch 12v |
1 x | SPARK Switch 7.4v |
2 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Circlick securite |
1 x | MPX-Dean "T" Adapter |
1 x | TP/TopFuel - XH 2/3S Adapter |
2 x | UBEC 6A KAVAN |
1 x | Towing hook |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
2 x | Glases Nimbus "Black" |
2 x | Glases Stratus |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | PSC 6 |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | DPS Switch JR/JR |
1 x | SBEC 40 |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
2 x | Beech dowels 2.0 x 1000 mm |
2 x | SBEC 30 D |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | 12V Car Adapter |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
2 x | Charger 220/110v |
2 x | Axle for AXI 2208/xx motors |
2 x | Axle for AXI 5330/xx motors |
1 x | AXI 2814/10 V2 |
1 x | EXTRA NG 85" 2159mm yellow/blue |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | Three-function control switch by FUTABA |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Futaba Neckstrap |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | AXI 2820/14 V2 Long |
1 x | AXI 2826/6 V2 Long |
1 x | AXI 2820/12 V2 |
1 x | 2020 motor power ring |
1 x | AXI 2826/10 V2 Long |
1 x | AXI 2204 Multicopter |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 2808/24 V2 Long |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | Motor OS 3820-1200 electric |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | TX-Tray V1 (L) (Black) |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Futaba Radio Case |
1 x | 6 mm Prop Adapter M8 |
1 x | 4 mm Prop Adapter M6 |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Neck strap Double V2 |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | 2 mm Prop Adapter M6 |
2 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | 4 mm Prop Adapter M8 |
1 x | wire tensioner (black) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Blind nut M3 (4 pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Blade holder lower |
1 x | Complet landing gear |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
2 x | 30 cm BEC cable (female) |
1 x | Glases Flitemaster |
1 x | Glases Aspen |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Three-position switched channel, short |
1 x | Micro Switch button |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Battery FUTABA 18MZ |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Regulador Jeti Jes 045 |
2 x | Cable coupler M3 (10 uds) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Wire easy tensioner (red) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | 57 mm micro-mini servo cover |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Astra wing Joinner (Top Model) |
1 x | SD HC 8 GB |
1 x | 90x60 mm standart servo cover |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Pan Head Screw M2x6 PH |
1 x | Screw M2.5x10 (10 pcs) |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | LED blink wire flashing (orange - 2pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | ED Position Lights wireless (Set of 3) |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | Baering 3x8x4 |
1 x | Cierva C30 spanish decoration Stickers |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Head upper part |
1 x | LA500 housing-lower cyclic |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Blade holder center GFK 0,5 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Two-function control switch + button by FUTABA |
1 x | Decorative caps, multicoloured |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Glases Moritz |
1 x | Glases Nimbus |
1 x | SPS Remote switch actuator |
1 x | 5 LiPo XH>EH adapter |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | TrainerCord (master-learner) |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Opto Gas Engine Kill Switch |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Fixed launching hook |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | resin-hardener L-385 H-385 (5000 g) |
2 x | resin-hardener package L-385 with hardener H-385 |
2 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Axle for AXI 4130 V2 motors |
1 x | FesEx-Uni6 System |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | White gelcoat 1 Kg |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Mould Resin P 10 kg |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | Axle for AXI 4120/xx motors |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
1 x | Axle for AXI 2814/xx motors |
1 x | Axle for AXI 2808/xx motors |
1 x | Axle for AXI 2820/xx motors |
1 x | Axle for AXI 2212/xx motors |
1 x | Axle for AXI 5325/xx motors |
1 x | Bearing 698-2Z for AXI 5330/xx |
1 x | Axle for AXI 5345/xx motors |
|
16,711.93EUR |