1 x | DYNAMOMETER S-1580 |
1 x | Optical RPM Sensor |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | 800TVL CMOS camera for FPV |
1 x | USB Mini Camera endoscope |
1 x | Parachute PV6 for F3J |
1 x | Rescue 1,8m2 / BackPack |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors banna gold 5,5 mm (M/F) |
2 x | XH male balance (5S) connector (2 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
2 x | 2 mm male connector (2 pcs) with safety connector |
2 x | Connectors banna oro 3 mm (M/F) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
3 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | Ball link Aluminio M3 (2 pcs) |
4 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Threaded coupler M3 (10 uds) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
3 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
3 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Threaded coupler M2 (10 uds) |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | SE Ring 300 mm (2 pcs) |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Tape GFK 50 mm |
2 x | Tape GFK 38 mm |
1 x | Foil for sticking flaps and ailerons |
2 x | SE Ring 480 mm (2 pcs) |
2 x | 20x200 mm battery rings |
2 x | SE Ring 360 mm (2 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
2 x | SE Ring 400 mm (2 pcs) |
2 x | Tape GFK 25 mm |
3 x | SE Ring 250 mm (2 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | CM-3 |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Hot Glue Stick GREEN |
1 x | Support pumb/filter Xicoy X45 |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
3 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | SD HC 8 GB |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Parachute BACKUP X100 |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Connector CAN 15 |
2 x | XT-60 connector (male) |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Parachute P4 |
1 x | MPX Support (2 pcs) |
1 x | XH LiPo extension lead |
1 x | XH male balance (9S) connector (2 pcs) |
2 x | Connectors MPX black male |
1 x | Bag connector 2 mm |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Windsock Ozone L -1200 mm |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | XT-60 connector (female) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | XT-30 connector (pair) |
1 x | Conector XT-30 (macho) |
2 x | Connectors banna oro 6,0 mm (M/F) |
1 x | XT-90 connector (pair) |
1 x | XH female balance (6S) connector (2 pcs) |
2 x | Connectors MPX black female |
1 x | MR30 connector male |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Windsock Ozone L - 700 mm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Para-RC Mix |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
2 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Conector BEC male (10 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Conector BEC female (10 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Baal link 4/14/4 (5 pcs) |
2 x | LA500 pre-rotation gear hub |
1 x | LA500 tail empennage |
1 x | Piñon motor rotor LA-500 |
1 x | 3 mm Short Prop Adapter M5 |
2 x | wire tensioner (red) |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | wire tensioner (silver) |
1 x | 30 cm MULTIPLEX female connector |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | wire tensioner (black) |
2 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Pulley brass 4/1,5 (2 pcs) |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
2 x | Marker ties (20 pcs) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | BABY glider drawings (Aero-naut) |
1 x | Gracia (Top Model) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | DUPLEX 2.4 EX MBar |
1 x | Hand Pads for Tray JETI |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Connectors DEANS (T) micro |
1 x | Head spacer |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Conector JR Servo male (10 pcs) |
1 x | Battery plate |
1 x | Retract Landing gear ER40 Combo Custom complete |
1 x | White large kwik link (10 pcs) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Wire easy tensioner (red) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Landing gear strap medium (4 uds) |
1 x | LA500 cyclic central part |
1 x | LA500 pre-rotation gear |
1 x | LA500 housing-upper cyclic |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | Adapter SPEED 480 whit axle short |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | JIVE 120+HV Esc |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Small kwik link (10 pcs) |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Astra (Top Model) |
1 x | Gearbox KPG27/28 4,7:1pinion |
1 x | Esc KOSMIK 200+ HV |
1 x | FELIX SportJet Yellow 2200 mm |
1 x | Mounting frame MPX female connector |
1 x | Contacto macho pin conector (10 pcs) |
1 x | MPX Support |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Connectors MPX male (PIN double) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Conector Servo female 4 pines |
1 x | Connectors MPX female |
1 x | Bearing housing |
1 x | 30 cm DEANS female connector |
1 x | Electromagnets brake |
1 x | Bearing 3x6x2,5 |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Gold antispark 5,5 mm plug |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Round Rod 1.0x3.5 cm |
2 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Micro clevis (10 uds) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Long ball link M1.6 (6 uds) |
1 x | Lock nut M5 (20 pcs) |
1 x | Lock nut M2 (10 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | LA500 nose |
1 x | LA500 ciclic lever |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | KIRA 400-39 5,2:1 |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | KIRA 480-38 |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | KIRA 480-26 5,2:1 |
1 x | PC-21 2.880 mm RED |
1 x | MB339 Freece PNP 1790 mm |
1 x | KIRA 480-31 5,2:1 |
1 x | JIVE 100+LV Esc |
1 x | JIVE 80+LV Esc |
2 x | SE Ring 330 mm (4 pcs) |
2 x | |
1 x | Cinta Goldfix 1m |
1 x | PC-21 2.880 mm RAAF Sheme |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | PC-21 XXL 3.395 mm |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | Q-12 2000 mm Electric |
1 x | VIPER SL Gold PNP 2270 mm |
1 x | Esc KOSMIK 160 HV |
1 x | PC-21 XXL 3.395 mm |
1 x | KIRA 500-36 6,7:1 |
1 x | SE Ring 200 mm (2 pcs) |
1 x | XICOY X45 rail |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Jeemo Dolly |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Set stickers JEEMO "Andy" |
1 x | Spikes Band (5 m) |
1 x | Pipa 3D F-16 Scale 1/6 |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | SE Ring 240 mm (2 pcs) |
|
38,669.52EUR |