1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Rubber profile 6-2 mm 2M |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Flat Connector 4.0 mm x 1000 mm |
3 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | ABS angle 3,0x3,0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
3 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
4 x | TrainerCord (master-learner) |
1 x | APM2.6 Power module with 5.3V DC BEC |
3 x | Circlick securite |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | 5 LiPo XH>EH adapter |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | USB HLS prog. interface |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
4 x | Black copper lacquer wire Ø0,2 mm (5 m) |
3 x | "Y" charging 4mm wire (2 IN-1 OUT). |
3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
3 x | CC 03 |
1 x | Adapter lead MPX/EC3 |
1 x | 30 cm BEC cable (female) |
2 x | BEC 3A FOXY |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
2 x | Round Rod 5,0x1000 mm |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Rescue 1,8m2 / BackPack |
1 x | Profile ABS half cane 7.0x1000 mm |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Propeller POWER-PROP 7x7 |
2 x | BALSA triangular 15x15x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Dean "T" - Futaba Adapter |
2 x | 2 LiPo XH>EH adapter |
1 x | 30 cm BEC cable (male) |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | SPARK Switch 7.4v |
1 x | EWC3 100 cm wing connector |
1 x | Three-position switched channel, short |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Micro Switch button |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | JETImodel Addcap 1640 |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Male connector for 6 pines AWG |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Round Rod 1,5x1000 mm |
2 x | Strip 2,5x1,25x330 mm |
2 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Blades 330mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Threaded coupler M3 (10 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | CC 01 |
1 x | Silent-blocks DLE 170M |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | 9x4.7 * 22x12 carbon propeller |
2 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
2 x | CC 02 |
2 x | TMM 2512-3S heli |
1 x | SPS 70V 140/280 A |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Multi-adapter balancer JST - TP |
1 x | MPX-Dean "T" Adapter |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | SPS 70V 100/200 A |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Extension 5 lipos JST/C |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Neck strap JETI DC |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Car Charger DC/DS-16 |
1 x | DSM 10 Dual Switch Mixer |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | Female connector for 6 pines AWG |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Motor DLE 430 cc - Paramotors |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Motor mount class 48" |
1 x | Round Rod 4,0x1000 mm |
1 x | Carbon blade 230 mm |
2 x | Blade holder metal LAMA |
1 x | T-shape holder metal LAMA |
2 x | Swashplate metal LAMA |
1 x | Coversion set HIROBO EX/EAGLE elektro |
2 x | Flybar support metal LAMA |
2 x | PropCover 16-20" (2 pcs) |
1 x | HBC 10035-3 32-Bit |
1 x | CC 05 |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Motor Advance 50-6 |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | FesEx-Uni8 System |
1 x | CM-3 |
1 x | PSC 5 |
1 x | Shaft sleeve LAMA |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Motor Advance 30-10 F3A |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | CC 11 Conector |
1 x | TMM 1210-3S heli |
|
11,830.41EUR |