1 x | Ferrita 27x14x7 mm |
1 x | Ferrita 14x8x5.5 mm |
2 x | Ferrita 17x10x6.5 mm |
2 x | DYNAMOMETER S-1580 |
1 x | Softshell Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Shirt Hispano Aviación |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | 3 LiPo XH>EH adapter |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | BEC 3A FOXY |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | USB HLS prog. interface |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Adapter lead MPX/EC3 |
1 x | Circlick securite |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | JETImodel SINGLE BEC |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
3 x | Premium servo extension 100cm |
1 x | Extension silicon 30 cm female (Graupner) |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
3 x | Premium servo extension 50cm |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
2 x | Extension silicon 100 cm (Futaba) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Premium servo extension 25cm |
2 x | Extension 15 cm (Futaba) |
1 x | Futaba male 40 cm extension |
2 x | Extension silicon 35 cm male (Futaba) |
2 x | Extension PVC 150 cm (Graupner) |
3 x | Cable S.BUS 3 salidas 100 mm |
2 x | Futaba Female 40 cm extension |
3 x | Cabel "Y" 30 cm (graupner) |
1 x | Cabel "Y" 30 cm (Futaba) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
3 x | Extension 30 cm (Futaba) |
1 x | Cabel "Y" 15 cm |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Cable control set |
1 x | 6 mm aluminium horn with patella |
1 x | Small aluminium horn blue (2pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn with ball 55x40 |
1 x | Horn 6/27 with M3 Bearing |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Horn with ball 40x30 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Cable with accesories |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Rescue 1,8m2 / BackPack |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Vasa model Catapult |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Bungee HLG Premium |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
3 x | Ball link M3 (10 pcs) |
2 x | Socket head long ball link M3 (2 uds) |
1 x | Ball link M1.6 (6 uds) |
1 x | Futaba Female 40 cm extension |
1 x | Landing gear axle Ø 8 mm (2 uds) |
2 x | Premium servo extension 75cm |
1 x | SBEC 40 |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
2 x | Socket head ball link M3 (2 uds) |
2 x | M2,5 Diam metal short ball link V3 (2 pcs) |
2 x | Ball link M2,5 (10 pcs) |
1 x | Joint with bearing M2,5 22x5,5 |
2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Short ball link M2 (6 uds) |
3 x | Ball link M2 (10 pcs) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Ball link M3 RPA's-UAV's |
1 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | TrainerCord (master-learner) |
1 x | Extension 90 cm (Futaba) |
1 x | SPS Remote switch actuator |
1 x | SWTU2 switch |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Three-position switched channel, short |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Extension 100 cm (Futaba) |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | AXI 2814/16 V2 Long |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Motor Mega AC 16/15/07 |
1 x | Motor Mega AC 16/30/01 |
1 x | AXI 2826/6 V2 Long |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Fiberglass motor-holder for electric motors |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Motor holder AXI |
1 x | M3 Maxi ball link (2 uds) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Charger LiPo Charger4 |
1 x | Esc MasterBasic 90 Opto |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | XPower XC3522/5 LS |
1 x | AXI 2820/12 CYCLONE |
1 x | Decorative caps, multicoloured |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Motor Mega AC 16/35/01 |
1 x | AXI 2808/16 V2 Long |
1 x | AXI 2814/10 V2 |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Motor Mega AC 16/15/02 |
1 x | AXI 2820/14 V2 Long |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | AXI 2217/16 V2 Long |
1 x | Bearing block for noseleg landing gear |
1 x | AXI 2212/12 V2 |
1 x | 2 LiPo XH>EH adapter |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | A60 Motor Mount Alu complete set |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Bearings for motor HACKER C50 |
1 x | Frontal support Speed 280 |
1 x | Receiver bed (Blue) |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Short ball link M3 (6 uds) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Long ball link M2 (6 uds) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Marker ties (20 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Servo Mount M (blue) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Motor mount M |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Secraft Fuel system v2, red color |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Servo Mount S (red) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | TMM 2512-3S heli |
1 x | Battery charging cable XT60 |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Motor Mega AC 16/25/02 |
1 x | Axle for motor A30-XL V2 |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension silicon 30 cm female (Futaba) |
2 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Adapter rotula M3 |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Gates hinge |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | 6 mm M3 variable horn |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 52 mm servo arm |
1 x | Futaba 38 mm servo arm |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | 6 mm ball link M3 (10 pcs) |
|
7,975.79EUR |