1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | ABS 500 x 400 x 1 mm (white) |
3 x | ABS 500 x 400 x 1,5 mm (white) |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Buy Perforated film 100 cm / 10 m |
4 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
4 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Buy Perforated film 145 cm / 50 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Carbon fibre sandwich sheet 350x150x3 mm |
2 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
2 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
3 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
2 x | Glass fabric 425 g/m² aero,10x1m |
2 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
2 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
3 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
2 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Xplorer3 anemometro |
1 x | Xplorer1 anemometro |
1 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Glases Moritz |
1 x | BALSA triangular 15x15x1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Glases Stratus |
1 x | BALSA trip 10x10x1000 mm |
1 x | Glases Innovation Plus |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Adjustable launching hook |
1 x | Cap Hispano Aviación |
1 x | Softshell Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Fiberglass plate 350x150x3.0 mm |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Fiberglass plate 620x540x1,0 mm |
2 x | Fiberglass plate 350x150x1.5 mm |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
2 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Medidor ángulos y/o incidencias |
1 x | WingFix ULTRA Black Edition |
1 x | Propeller balancer |
1 x | Propeller balancer |
1 x | Field folding model stand SebArt |
2 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Angle of incidence meter |
1 x | Field folding model stand |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Xplorer4 anemometro |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Film release agent PVA 25 ml |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Vertical mounting servo holder |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | 1/12 Pilot "Tom" |
2 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | 1/7 Pilot "Japanese" |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Futaba 38 mm servo arm with ball link |
1 x | 1/6 Pilot "Tony" |
1 x | 1/6 Pilot "John" |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | PS-050 TONEGAWA Servo |
1 x | SERVO HOLDER |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Servo DITEX EL0510M |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
2 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Extension Arm for Carburetor |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | FESTO connector M7 Quick 4 mm |
1 x | DLE Ignition unit |
1 x | EME 55 cc carburetor WALBRO |
1 x | T-Hose connector 4-4-4mm |
3 x | FESTO connector M7 barb fitting 6mm |
1 x | Fuel tank 1500ml (50oz) |
1 x | Support 45% Hopper JetsMunt |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | FESTO connector M5 Quick 4 mm |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
2 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | GLOW 9C + accesories |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | PVC grid straight 290x185x0.32 mm |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Extension Arm for Carburetor (red) |
1 x | DLE 55 carburetor |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Electromotor starter EME 35cc |
1 x | 550 cc gasoline fuel tank complet |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Compact on-board starting system (9713) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | Styrene plate 320x120x1.0 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Glow starter with charger 230v |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Propeller CFK 18x16 |
1 x | Spinner 125 mm GFK |
1 x | Servos security connector (2 pcs) |
1 x | MR30 connector male |
1 x | MR30 connector female |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller CFK 14x8 Slim |
1 x | Xplorer2 anemometro |
1 x | Sensor Ignition RCEXL Universal |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Captador RCEXL para DA |
1 x | LiPo Storage Box Type "BIG" |
1 x | Robart Door Hinge (Pk2) |
1 x | LOWER TOW HOOK |
1 x | Support pumb/filter Xicoy X45 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Angle measurer |
1 x | Surface Indicator Gauge Small |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Cabel "Y" 15 cm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | KAVAN CA Activator 150ml |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Propeller CFK 14x8 |
1 x | Connectors DEANS (T) |
1 x | Conector MR-60 (pareja) |
1 x | Propeller CFK 17x18 |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Support Filtro FESTO |
1 x | Support pump Xicoy X45 |
1 x | Servo Mount S (red) |
1 x | TRAINER RC Pilot V2 90" w/r ARF |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Fuel Dot (Silver) |
1 x | Quick hose connector 3-3 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Fuel dot V3 (Red) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | Heli digital angle measurer |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | UHU Por 50ml/40g |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Mould Resin P 10 kg |
|
17,623.40EUR |