3 x | Motor A2212/13T |
2 x | ABS angle 6,0x6,0x1000 mm |
2 x | Profile ABS half cane 4x2.5x1000 mm |
2 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Extension 100 cm (Futaba) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Extension 90 cm (Futaba) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Propeller balancer |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Extension lead 15 cm Multiplex |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Allen wheel collar M3x3 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 280 cc gasoline fuel tank complet |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | CA Glue fast 20g |
1 x | Ball Bearing Oil 25 ml |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | 12 mm floating pad (49 pcs) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | 800TVL CMOS camera for FPV |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Allen wheel collar M4x6 |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | Clip fixing for wing (2 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Ferrita 14x8x5.5 mm |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Conector MR-60 (pareja) |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Crawler GRE-24 RTR 1:24 Arena |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Extension 15 cm (Futaba) |
1 x | Field folding model stand SebArt |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | USB Mini Camera endoscope |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Extension silicon 100 cm (Graupner) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | WingFix ULTRA Black Edition |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Extension 30 cm (Futaba) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Extension 7.5 cm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Propeller balancer |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Futaba Female 40 cm extension |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Futaba Female 40 cm extension |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Angle measurer |
1 x | Surface Indicator Gauge Small |
1 x | Premium servo extension 100cm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Field folding model stand |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Cabel "Y" 15 cm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | PT 16x10 E Propeller |
1 x | 80 mm rods set for direction control |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | PT 22x10 EL Propeller |
1 x | Ventus 1:4 set of instruments |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Canopy Latch |
1 x | Allen wheel collar M3x5 |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 100 mm rods set for direction control |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Jeti Black cap |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Xoar Electric Beechwood Prop 16x7 |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Ferrita con funda |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | PT 21x13 EL Propeller |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Ferrita 17x10x6.5 mm |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Ferrita 27x14x7 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | 140 mm rods set for direction control |
1 x | PT 20x13 EL Propeller |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | UHU hart 35 g |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | FOAM - CURE™ (24g) |
1 x | 1/12 Pilot "Langley" |
1 x | MEKP Harderner 100 g |
1 x | Epoxy 30 min. 200g |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | 1/7 Pilot "Japanese" |
1 x | UHU Por 50ml/40g |
1 x | Mould Resin P 10 kg |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Epoxy 5 min. 500 g (Resin) |
1 x | |
1 x | Cable coupler M2 (10 uds) |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | Blade holder metal LAMA |
1 x | CA Glue (medium) 20g |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | Debonder CA 20g |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | BETA 1400 RTF Red |
1 x | Adaptadores carga 6s JST-XH |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Digital scale up to 40 kg |
1 x | Ciano KAVAN Medium 20g |
1 x | Aluminium ignition bad (blue) |
1 x | 30 mm gas motor standoff |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | 10 mm gas motor standoff |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | 20 mm gas motor standoff |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 5 mm gas motor standoff |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | 25 mm gas motor standoff |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Aluminium battery holder red |
1 x | 45 mm gas motor standoff |
1 x | Connectors banna oro 4 mm (M/F) |
|
4,827.16EUR |