1 x | Silent-blocks DLE 170M |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
2 x | Jeti Black cap |
1 x | 2 LiPo XH>EH adapter |
1 x | Oracover CARBON Metalic 1 m |
1 x | Angle of incidence meter |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Ply-Span 450x600/13g Blue |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Monokote ROJO misil (1.8x0.65m) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | 30 cm BEC cable (male) |
1 x | Oratex Natural White 2m |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Couple M4 for wire (10 pcs) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Field folding model stand SebArt |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Squared carbon wing joinner 5x5x220 mm |
2 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Screwdriver for Torx® TX6 |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | White smoke canister 100 g |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Green smoke canister 100 g |
1 x | 1/12 Pilot "Fighter" |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | 3l Smoke oil |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Hot Glue Stick RED |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Parachutist |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | "S" set for boats |
1 x | 1,5x50 mm allen screwdriver |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
2 x | Premium servo extension 25cm |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Yellow smoke canister 140 g |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Red smoke canister 65 g |
1 x | Fox MDM 1 6000 mm |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
2 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Blind nut M3 (4 pcs) |
2 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Tape GFK 25 mm |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Angle measurer |
1 x | Field folding model stand |
1 x | Medidor ángulos y/o incidencias |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Propeller balancer |
2 x | wing/fuselage connector for 3 pines AWG 20-24 |
2 x | Truck-trailer for gliders 720 x 239 mm |
2 x | RX external cable for estandar receivers |
2 x | USB Interface REVOLECTRIX for CellPRO 10s |
2 x | Surface Indicator Gauge Small |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | FOX MDM-1 3.500 mm ARF White |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
2 x | ALU servo arm 3 mm shaft |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
3 x | ALU servo arm 90º 3 mm shaft |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
3 x | Universal batery Tester |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
3 x | Servo AN-20 MGBBA |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | "L" servo arm 65x49 mm (2 pcs) |
2 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Blind nut M5 (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Blind nut M6 (4 pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | CARBON CUB 15cc ARF 2280 mm |
1 x | EXTRA NG 85" 2159mm red/white |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | YAK-23 "FLORA" (RBC Kits) |
1 x | CESSNA 50E White/Blue |
1 x | Blade holder upper |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Set of buckles and strap, 1:4 scale. |
1 x | SAGITA Alsema 4.0 m |
1 x | Ventus 2cx 4.5 m Canopy |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | SE Ring 400 mm (2 pcs) |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Bidule 55 V3 2460 mm |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | EXTRA NG 85" 2159mm yellow/blue |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Bidule 170 ARF 3.48 m |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Interface Realflight Simulator |
1 x | de Havilland Vampire (Rc Factory) |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | Mini AVANTI S EDF 80MM RTF |
1 x | Head lower part |
1 x | Head core bushing |
1 x | WINGO 2 ARF |
1 x | Raer wall |
1 x | Nut M1,6 |
1 x | Blades 330mm |
1 x | Side rudder |
1 x | DRACO 2.0m PNP |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Reed valve for DA-60/70 |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Spring Clip Ø25 mm |
1 x | Piston ring for DA-150 |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Pick up DA50/100/150 |
1 x | Cylinder ZG 26SC/SLH |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Reed valve for DA 50-R |
1 x | Cylinder for ZG20 |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Covered closure or fairings |
1 x | 20x200 mm battery rings |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Motor Advance 30-10 F3A |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | Bearing 698-2Z for AXI 5330/xx |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
1 x | Opto Gas Engine Kill Switch |
1 x | Servo AN-8 HBA |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | Tool for entel |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | UBEC 6A KAVAN |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | AXI Cooler 22xx |
1 x | Prop Holder AXI 41xx V2 |
1 x | Axle for AXI 4130 V2 motors |
1 x | Axle for AXI 5325/xx motors |
1 x | ESC YGE 205 HVT BEC |
1 x | CC 01 |
1 x | Male connector for 16 pines AWG |
1 x | ESC KAVAN R-80SB SBEC 80A |
1 x | Battery charging cable XT60 |
1 x | JETImodel Addcap 1640 |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | PSC 6 |
1 x | Servo KST X08 Plus 9g HV servo |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | NF-3m Heli Kit |
2 x | SSPS105 Super Hi-Power servo |
2 x | PS-050 TONEGAWA Servo |
1 x | JETI Counter for DC-16 (Blue) |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Remote electric ignition system |
1 x | ESC PULSAR A-40 |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Servo BMS-4112 |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Rocket D9-7 |
1 x | Electric rocket starters (6 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Servo BLS-M55B 61.2kg |
1 x | AX-60 starters (5 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | |
1 x | Motor Advance 50-6 |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Spikes Band (5 m) |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | Marker ties (20 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Motor ORBIT 20-12 with coolingfan |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Cinta Goldfix 1m |
1 x | Ring 320 mm length (5 pcs) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | AXI Cooler 41xx |
1 x | Axle for AXI 2217/xx motors |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | 8 mm Adapter for AXI53xx |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Motor OS 3820-1200 electric |
1 x | Axle for AXI 2814/xx motors |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | Axle for AXI 2208/xx motors |
1 x | Axle for AXI 2820/xx motors |
1 x | Axle for AXI 28269/xx motors |
1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
1 x | Axle for AXI 2808/xx motors |
1 x | Universal Prop Saver |
1 x | Prop Saver for AXI 22xx/xx |
1 x | Axle for AXI 4120/xx motors |
1 x | Axle for AXI 5330/xx motors |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | CC 02 |
1 x | ESC YGE 90 HV F3A |
1 x | ESC YGE 120 LVK |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Female connector for 10 pines AWG |
1 x | Adapter lead MPX/XT60 |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Adapter lead MPX/EC3 |
1 x | ESC KAVAN PRO-160HV Opto 160 Amp |
1 x | Three-position switched channel, short |
1 x | Female connector for 6 pines AWG |
1 x | Adaptador USB - YGE |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | JETImodel SINGLE BEC |
1 x | 5 LiPo XH>EH adapter |
1 x | Male connector for 12 pines AWG |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Cabling for Fox MDM1 wings |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Soporte servo KST X08/H and Plus |
1 x | Propeller balancer |
1 x | ALU double servo arm 3 mm shaft |
1 x | RX cabel |
1 x | Selfstart electronic switch |
1 x | MAX BEC |
1 x | PSC 5 |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | SBEC Jeti |
1 x | WingFix ULTRA Black Edition |
1 x | Baseplate servo |
1 x | TrainerCord (master-learner) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | USB HLS prog. interface |
1 x | BEC 3A FOXY |
1 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | Program Card G2 RAY |
1 x | NF-3X-80 liner Kit |
1 x | NF-1 RC set |
1 x | NF-3XL set |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Futaba Female 40 cm extension |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Blind nut M4 (4 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Screw M3x30 (10 pcs) |
1 x | Futaba Radio Case |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Socket Head Screw M2x10 |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
|
44,267.04EUR |