1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | Aluminium sheet 500x250x0,5mm |
2 x | ABS 500 x 400 x 1 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Buy Perforated film 100 cm / 20 m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Starter EM Gear Power 80 |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Crimping tool |
1 x | Extension MPX-MPX 20 cm |
1 x | Turbina KINGTECH K320 G5 |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Foam plastic plates (310x210x5 mm) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Futaba Female 40 cm extension |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
3 x | Premium servo extension 75cm |
1 x | Fiberglass plate 350x150x4.0 mm |
3 x | Fiberglass plate 350x150x1.5 mm |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Fiberglass plate 350x150x0.3 mm |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
2 x | Canopy Latch |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
3 x | Foam plastic plates (310x210x8 mm) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
2 x | Premium servo extension 50cm |
2 x | Film release agent PVA 25 ml |
2 x | Electric spoiler 250 mm (2 pcs) |
3 x | Stainless steel cable Ø 0.5 mm (20 m) |
3 x | Foam plastic plates (310x210x3 mm) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Styrene plate 320x120x1.0 mm |
2 x | Extension silicon 10 cm (Futaba) |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Extension 7.5 cm |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Carbon plate 350x150x3.0 mm |
1 x | One touch canopy lock |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Carbon plate 350x150x5.0 mm |
2 x | Locking cable tie 4.6x203 (uds) |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Prolongador S-Bus JR/JR 10cm |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Extension silicon 30 cm male (Graupner) |
2 x | SUS wire 3m (nylon coated) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Premium servo extension 100cm |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Fiberglass plate 1200x1000x0,2 mm |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Fiberglass plate 620x540x3,2 mm |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Premium servo extension 25cm |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Covered closure or fairings |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Release film 100 cm x 50 m |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Cabel "Y" 15 cm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
3 x | Set cintas unión paracaídas 145 cm |
2 x | Aramid 50 daN 50 m |
2 x | Windsock Ozone L -1200 mm |
2 x | Opale Rucksack |
3 x | Parachute P4 |
2 x | Parachute BACKUP X100 |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Paramotor Trike XL |
3 x | Trike XL motor set (motor+esc+prop) |
2 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | MAX pilot ARTF |
1 x | Motor A2212/13T |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | Tow hook for tug |
3 x | Fixed launching hook |
1 x | Adjustable launching hook |
2 x | Ferrita con funda |
2 x | Vest clothes Hispano Aviación |
1 x | Softshell Hispano Aviación |
1 x | Cap Hispano Aviación |
2 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Gold antispark 4 mm plug |
2 x | XH female balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Optotronix Aurora Plug |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Connector CAN 15 |
1 x | Connectors banna oro 2 mm (M/F) |
2 x | Banna gold connector 2,5 mm (M/F) |
2 x | Conector BEC male (10 pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Connectors DEANS (T) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Conector Servo female 4 pines |
1 x | 30 cm DEANS female connector |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Starter EM Gear Power 250 |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Glass fabric 25 g (2 m²) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Extension silicon 75 cm (Futaba) |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Control for forward wheel (MINI) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Cockpit latch closing I=10 mm |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Extension 15 cm (Futaba) |
1 x | Mini Infrared Thermomiter |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Extension silicon 25 cm (Graupner) |
3 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | 100 mm rods + T patellas set for direction control |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | Pushrod octagone 3/2 with coupler M2 |
2 x | Extension 100 cm (Futaba) |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | Para-RC Mix |
1 x | 1000 ml sealer (DOPE) |
1 x | 2,3 mm Prop Adapter M6 |
3 x | Parachute PV6 for F3J |
2 x | Wing OXY 0,5 pulgadas2 |
1 x | 3 mm Prop Adapter M6 |
1 x | 12x6 tree blades propeller |
2 x | Windsock Ozone L - 700 mm |
1 x | Ferrita 27x14x7 mm |
2 x | Paramotor BackPack XXS 2 |
1 x | 10x7 tree blades propeller |
2 x | Wing OXY 5,0 m2 |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Carbon plate 350x150x4.0 mm |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Circlick securite |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Balsa panel 10x100x1000 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Balsa panel 8.0x100x1000 mm |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Suncover 100cc Red |
1 x | Spray Graphit 33 |
1 x | Ferrita 14x8x5.5 mm |
2 x | XH female balance (3S) connector (2 pcs) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Chopped glass fibre strands 3 mm |
11 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Pushrod octagone 3/2 |
2 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
3 x | Landing gear frontal support 25x32x16 |
1 x | Allen wheel collar M4x6 |
1 x | Buy Perforated film 100 cm / 10 m |
2 x | Wheel collar 3.5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Allen wheel collar M3x5 |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Allen wheel collar M3x3 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
2 x | Landing gear frontal support 29x26x13,5 |
2 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | AXI 2820/12 CYCLONE |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
2 x | LUCAS pilot ARTF |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | Actrocon 60A ESC |
1 x | Anchor 25 mm (2 uds) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | Ballast 700gr OPALE |
1 x | FIALA Propeller 28x10 |
1 x | FIALA Propeller 20x8 |
1 x | Propeller VESS 27A |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | XT-90 connector (pair) |
1 x | MR30 connector female |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Conector XT-30 (hembra) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | MPX Support (2 pcs) |
1 x | PowerBox MicroSwitch |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Fundas para el transporte F3A alas |
1 x | Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace) |
1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Vess propeller 11x7 S |
1 x | FIALA Propeller 23x8 |
1 x | FIALA Propeller 27x10 |
1 x | Vess propeller 13x6 S |
1 x | FIALA Propeller 25x10 |
1 x | Vess propeller 12x7 S |
1 x | FIALA Propeller 16x6 |
1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Propeller VESS 32A |
1 x | FIALA Propeller 18x8 |
1 x | FIALA Propeller 24x8 |
1 x | FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Towing hook <3m |
1 x | Bag connector 2 mm |
1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Fail Safe air retract |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | SU 29S 140 carbon landing gear |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Bearing block for noseleg landing gear |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | White aluminium 230 mm landing gear |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Conector MR-60 (pareja) |
1 x | MPX Sub-D Adaptor |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Red 3m5 mm connector holder |
1 x | Protector Connector Dean-T (1 pair) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | PRO-HV Dual Action Valve |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Indoor landing gear set |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Quick hose connector 4-4 mm |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Steering arm 16 mm Ø 4 mm |
2 x | 100 mm rods set for direction control |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Brake for 140 mm wheels |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | 40 mm air cylinder |
1 x | Hose connector stopper 4 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | 6 mm aluminium horn with patella |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Quick hose connector 3-3 mm |
1 x | Dual Sequencer Gear and Canopy |
1 x | Body for landing gear Ø 3 mm |
1 x | Landing gear strap large (4 uds) |
1 x | Hose stopper 4 mm |
1 x | Quick hose connector 3-3 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Landing gear strap small (4 uds) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Snap long M2 (10 uds) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
2 x | Wing bolts M3 Steel screw Red (2 pcs) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | MZ-12, 6 Channel HoTT |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Cockpit metalic closing |
2 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Window mounting channel 5m |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
|
25,854.74EUR |