1 x | Extinguisher CO2 - 2 Kg |
1 x | Medidor ángulos y/o incidencias |
1 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Field folding model stand |
1 x | Angle measurer |
1 x | Field folding model stand SebArt |
1 x | Propeller balancer |
1 x | WingFix ULTRA Black Edition |
1 x | Long pinned hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
3 x | Flap hinge (6 pcs) |
2 x | Micro flex hinge (12 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 15 mm reinforced hinge |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Z type of cable coupler Ø 1 (2 uds) |
3 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
3 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | 25 mm reinforced hinge |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Couple M4 for wire (10 pcs) |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Large flex hinge (12 uds) |
3 x | Angled clevis with threaded rod M3 |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
5 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
2 x | Spray EC Red 400ml |
1 x | Nitroverdu 500 ml |
1 x | Spannlack 1000 ml |
1 x | Release wax 250ml |
2 x | Spray YELLOW Inca Lexan 150ml |
1 x | Universal Colour Paste white 50 g |
1 x | 20 g tin paste |
1 x | Spray Graphit 33 |
1 x | Universal Colour Paste deep black 50 g |
1 x | Partall paste 650 g |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Starter EM Gear Power 250 |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Crimping tool |
1 x | Digital scale up to 40 kg |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Vacuum pump P1-N |
1 x | Screwdriver for Hexagon 1,27mm |
2 x | Screwdriver for Hexagon 1,5mm |
1 x | Horn 6/27 with M3 Bearing |
1 x | Copier 5x20 cm pcs |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 6 mm aluminium horn with patella |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Starter Sullivan-STAR 601 |
2 x | Starter EM Gear Power 80 |
1 x | Hot Glue Stick GREEN |
1 x | Horn 5/20 with M2 Bearing |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
2 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Pilot "Goose" (Slimline) |
1 x | Medium pin type hinge (12 uds) |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Pulley brass 5/1,5 (2 pcs) |
2 x | Pull-Pull complet set with CF rudder double servo arm |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | wire tensioner (silver) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | Wire easy tensioner (red) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Cable coupler M3 (10 uds) |
2 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Small flex hinge (12 uds) |
1 x | Round flex hinge (12 uds) |
1 x | Small pinned hinge (6 uds) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Fast attachment for servos (25 pcs) |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Micro control horn (2 pcs) |
1 x | Copier 2x20 cm pcs |
1 x | 5 mm M2 variable inclined horn |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | 1,5x50 mm allen screwdriver |
2 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Brake for 140 mm wheels |
1 x | LO 100 ARC 3.3m,frame canopy |
2 x | |
1 x | Fox MDM 1 4000 mm Std. |
1 x | LS-8 GFK 6m Glider |
1 x | Fox 4000 mm (Airwold) |
1 x | Hexagonal ball head 2.0 x 50 mm |
3 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Digital precision scale up to 2000 g |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
1 x | Universal Filter |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Indoor hinge with servo arm integraded |
1 x | LO 100 ARC 3.3m |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | Schul-Malpinsel Gr.5 |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | Adjustable brass horn threaded M3 |
1 x | Chili F3K 2 wing servo mounted |
1 x | 6 mm M3 variable inclined horn |
1 x | Handle for PERMAGRIT lime |
1 x | 2,5x60 mm allen screwdriver |
1 x | Starter 12v (Max 180 and 30ccm) |
3 x | Hot Glue Stick BLACK |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | 25 mm Sandpaper file |
1 x | 2,0x50 mm allen screwdriver |
1 x | Chili Race F3K (aramid nose) |
1 x | Small adjustable control horn with bearing |
2 x | Kwik link unmount tool |
1 x | Sandpaper file 13 mm |
1 x | Mini-handed clamp |
1 x | Sealing Iron Sleeve PROF |
1 x | Micro control horn T2 Ø 1 |
1 x | Hot Glue Stick RED |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Z Bender - S Type Tool |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Crimping tool |
1 x | 5 mm M2 variable horn |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Ball link M3 (10 pcs) |
1 x | Ball link M3 RPA's-UAV's |
1 x | Short ball link M2 (6 uds) |
1 x | Long ball link M1.6 (6 uds) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Ball link M2 (10 pcs) |
2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Short ball link M3 (6 uds) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 5 mm gas motor standoff |
1 x | Aluminium ignition bad (blue) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Cable Cargador FUTABA |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
1 x | Servo SAVOX SA-128S SG |
1 x | Servo GO-1053 MG 20.0kg |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
2 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Servo SAVOX SV-1261 MG |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
3 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Futaba 2x20 mm servo double arm |
1 x | Servo DITEX TD2612S |
1 x | XTorque CFK Servohebel 38 |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Futaba 52 mm servo arm |
2 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | HITEC DPC-11 programmer |
2 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Compact on-board starting system (9512) |
1 x | Metal ring front FEMA |
1 x | Xoar Electric Beechwood Prop 24x8 |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Threaded coupler M2 (10 uds) |
1 x | Restrictor FESTO 3/3 mm |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Wheel FEMA 178 mm / 8 mm |
1 x | Threaded coupler M2 (10 pcs) |
2 x | Propeller 8x4 Electric |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Propeller 3x3 |
2 x | Propeller 8x4,3 SlowFlyer |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Xoar Electric Beechwood Prop 22x10 |
2 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Xoar Electric Beechwood Prop 16x7 |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Servo RHINO pro SHV digi 4 |
1 x | LENTUS Multiplex Propeller 8x6 |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Paint gun for sprays |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | Servo SAVOX SV-1270 TG |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | FUNRAY RR |
1 x | PROFI TX fastening rings |
1 x | FunCub NG azul RR |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | LENTUS Multiplex Landig gear retract |
1 x | 40 mm gas motor standoff |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Kit hydraulic brake |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | EC-Cutter |
1 x | Socket head long ball link M3 (6 uds) |
1 x | PBS TJ 40-G2 Turbine |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Hysol Mixing Caps SET with 10 |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Servo safety connector (10 pcs) |
1 x | Hitec 25 mm servo arm with ball link |
1 x | HITEC 20 mm servo arm with ball link |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Spring Clip Ø25 mm |
1 x | Junta humo metalica G35 DLE35 |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | Distanzstück motor OS 120 AX |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servo SAVOX SB-2290 SG |
1 x | Piñones SAVOX SH-0350 |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Dust collector for mould cleaning |
1 x | Steel brush wheel with 2.35mm |
1 x | Fox MDM-1 ARF 3.5m Orange |
2 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | SAGITA Alsema 4.0 m |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Socket head long ball link M3 (2 uds) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
1 x | Receiver RFA05 5Ch compatible FUTABA |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Servo GO-09 9g |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | 200 Newtons FEMA absorber |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Ciano KAVAN Thin 20g |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
2 x | Propeller 9x7 SlowFlyer |
1 x | Metal clevis M3 (10 uds) |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Z-shaped servo mount |
1 x | Servo holder for retract |
1 x | Mudguard for 140/165 mm wheels |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Debonder CA 20g |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Cyano INSTA - CURE™ (12g) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cable coupler M2 (10 uds) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | L-shaped servo mount |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | 100 Newtons FEMA absorber |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Micro clevis (10 uds) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Extender tip (6 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cable coupler M3 (10 uds) |
1 x | Cable coupler M2,5 (2 pcs) |
|
52,837.23EUR |