1 x | Xoar Electric Beechwood Prop 21x10 |
2 x | Long pinned hinge (12 uds) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Tube Pitot to PIXHAWK |
2 x | Gates hinge |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | 15 mm reinforced hinge |
3 x | 18 mm reinforced hinge |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | PPM Encoder Module |
1 x | Flap hinge (6 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Small pinned hinge (12 uds) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
4 x | Fast'n EZ-CA-Hinge (12 uds) |
3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Long pinned hinge (6 uds) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
3 x | Large flex hinge (12 uds) |
2 x | 25 mm reinforced hinge |
2 x | Miniature brass strap hinge, 1 m |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
4 x | Flap hinge 33x9 mm (6 pcs) |
3 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | PIX Hawk with accesories |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | M3-M4 rubber washer (8 pcs) |
2 x | M3 black washers (4 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Ferrita 14x8x5.5 mm |
3 x | Ferrita 17x10x6.5 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | Threaded coupler M2 (10 uds) |
1 x | Small aluminium horn red (2pcs) |
2 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 13x8 Electric |
1 x | SE Ring 400 mm (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Beech dowels 10 mm x 1000 mm |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Small flex hinge (12 uds) |
2 x | Actuador lineal HLS12-100210-7.4v |
3 x | Robart Door Hinge (Pk2) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | Pin hinge 39x20 mm (10 uds) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
4 x | Aro pasacable Ø25 mm (4 pcs) |
4 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Profile ABS half cane 7.0x1000 mm |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | Lock nut M3 (10 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Lock nut M2 (20 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Switch Cap M (silver) |
1 x | Battery FUTABA 18MZ |
1 x | Receiver bed (Blue) |
1 x | SWTU2 switch |
1 x | Decorative caps, multicoloured |
1 x | Neck strap Double V2 |
1 x | Switch Cap L (silver) |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Maleta transporte FUTABA 10PX |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Socket Head Screw M2x10 |
1 x | Screw M3x8(10 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Ferrita con funda |
2 x | Ferrita 27x14x7 mm |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | 24x12 prop Super Silence |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support Pitot JETI |
1 x | Support ECU Xicoy X-45 |
1 x | FELIX SportJet Red/Yellow 2200 mm |
2 x | Indoor hinge with servo arm integraded |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Small pinned hinge (6 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Medium pin type hinge (12 uds) |
3 x | Gates hinge aluminium (1 pcs) |
1 x | Round flex hinge (12 uds) |
2 x | Soporte filtro FESTO (4 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Support Filtro FESTO |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
2 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
2 x | Support FUEL DOT V3 |
2 x | Support Flush MPX Conector (6 pcs) |
2 x | Support conector MPX (6 pcs) |
1 x | Angle support XT60 conector |
1 x | L-39 Albatros 138"/3.5m lenght ARF |
1 x | PC-21 XXL 3.395 mm |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | PC-21 2.880 mm RAAF Sheme |
1 x | Boeing (TX) T-7A RED HAWK |
1 x | PC-21 2.880 mm RED |
1 x | JMB-Jets K8 Trainer Jet PNP 2050 mm |
1 x | BD-5J PNP |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Propeller MENZ-S 21x8 |
1 x | Propeller MENZ-S 20x12 3 blades |
1 x | Propeller MENZ-S 17x8 |
1 x | Antenna holder bracket double |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Propeller APC 10x6 Electric |
1 x | Propeller APC 11x3.8 SF |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Spinner 82mm Black ventilado |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Spinner INOVA 63 mm White |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | F3A carbon 85 mm spinner for AXI |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Propeller MENZ-S 16x12 |
1 x | Propeller MENZ-S 19x10 |
1 x | Propeller MENZ-S 20x6 |
1 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Transmitter Stick Ends V1 Silver - M3 (2 pcs) |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | Two-function control switch + button by FUTABA |
1 x | Decorative caps, multicoloured, short |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Propeller APC 12x6 Electric |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Propeller APC 10x4.5 MR |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 11x7 Electric |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Screw M3x12 (10 pcs) |
1 x | Pan Head Screw M2x6 PH |
1 x | ULTIMATUM 2.0 m red/black |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | Electric Landing Gear AVANTIA XS |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Servo HITEC HS-325 BB |
1 x | Servo HITEC D645 MW |
1 x | Servo HITEC D954 TW |
1 x | Set wings Mini AVANTI S 1.4m W/B/R |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | 29x12 prop Super Silence |
1 x | 1/6 Pilot "John" |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | BULL MØ1 2.600mm BLUE |
1 x | ULTIMATUM 2.0 m orange/blue |
1 x | Fuselage BULL MØ1 2.600mm |
1 x | Avanti XS Jet , Exhaust for JetCat P-60/P-140 (SebArt) |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
1 x | MB339 Mini 1.45m Frecce TRICOLORI ARF +elec.L.Gear + 3 Microser |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | ULTIMATUM 2.0 m white |
1 x | ULTIMATUM 2.0 m Red Bull |
1 x | Canopy BULL MØ1 2.600mm |
1 x | ULTIMATUM 2.0 m yellow/blue |
1 x | BULL MØ1 2.600mm "ALPINE" |
1 x | BULL MØ1 2.600mm (mono color) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Avanti XS Jet , Tricolore Canopy |
1 x | Propeller POWER-PROP 7x7 |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Servo HITEC HS-5084 MG |
1 x | Servo HITEC HS-225 MG |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | Servo HITEC D625 MW |
1 x | Servo HITEC D85 MG |
1 x | Mini Avanti S 1.4m white/red |
1 x | Tren electrico JP ER-005-V2 Mini AVANTI (Sebart) |
1 x | Avanti S 1.8m Jet RED Style |
1 x | Mini Avanti S Jet, Set conversion turbine(SebART) |
1 x | Servo digital 17g MG - Std |
1 x | FUSELAGE STAND MINI AVANTI EDF/JET |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | L39 Mini 1.43m Red. +elec.L.Gear + 3 Microservos |
|
70,743.49EUR |