1 x | Dremel 3000 130W |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Digital precision scale up to 2000 g |
1 x | 3,0x60 mm allen screwdriver |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Ball Link Plier |
1 x | Cut tube |
1 x | Digital scale up to 40 kg |
1 x | 25 mm Sandpaper file |
1 x | 2,0x50 mm allen screwdriver |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Crimping tool |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | 55% silver electrodes (2 pcs) |
1 x | |
1 x | |
1 x | 1,5x50 mm allen screwdriver |
1 x | Copier 2x20 cm pcs |
1 x | Dremel PERMAGRIT thin lime |
1 x | Dust collector for mould cleaning |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | 2,5x60 mm allen screwdriver |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Covered closure or fairings |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | One touch canopy lock |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Straightened threaded rod M2-1m |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Cockpit plastic closing |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Marker ties (20 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
3 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | SE Ring 300 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | SE Ring 200 mm (2 pcs) |
3 x | SE Ring 350 mm (2 pcs) |
2 x | SE Ring 450 mm (2 pcs) |
2 x | SE Ring 250 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
3 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
3 x | 20x200 mm battery rings |
2 x | BALSA trip 2.0x10.0x1000 mm |
2 x | BALSA triangular 6x6x1000 mm |
3 x | Pine wood slat 10x10x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
3 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
4 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
3 x | Conector Servo female 4 pines |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Glases Ace |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Canopy Latch |
2 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Tube support Ø 6mm (10 pcs) |
2 x | Fuselage Autogyro RAINBOW |
3 x | Tail tube RAINBOW |
1 x | IKARUS plane |
1 x | Blade holder center |
1 x | Rudder |
2 x | Head lower part |
1 x | Servo Fork |
1 x | Blade holder upper |
1 x | Screw M3x16 |
1 x | Wheel keeper washer |
2 x | Raer wall |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | SE Ring 400 mm (2 pcs) |
3 x | 120x60 mm SLH KOVO wheel |
1 x | Tape GFK 25 mm |
1 x | Tape GFK 50 mm |
1 x | PPM Encoder Module |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Blade holder metal LAMA |
1 x | "S" set for planes |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Motor Mega AC 16/07/12 |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Motor Mega AC 16/25/02 |
1 x | Blade Holder (3 blades) |
1 x | Dean-T Plug Mold |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | Red 3m5 mm connector holder |
1 x | Lite Plywood panel 600x300x2.0 mm |
2 x | BALSA triangular 10x10x1000 mm |
1 x | MPX PCB "6 Pins", 5 pieces |
2 x | BALSA triangular 15x15x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | XT-60 connector (male) |
1 x | MPX Support |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | Rotorshape Autogyro |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Support pump Xicoy X45 |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Battery charging cable XT60 |
1 x | JETImodel Addcap 1640 |
1 x | Axle for motor A50-L |
2 x | Support XT60 conector (2 pcs) |
2 x | Soporte filtro FESTO (4 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
2 x | Soporte grifo FESTO (2 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Support Filtro FESTO |
1 x | Support ECU Xicoy X-45 |
1 x | Tapa estado carga XT-60 (6 pcs) |
2 x | Blade Holder Full (3 blades) |
2 x | Piñon motor rotor LA-500 |
1 x | Cable adapter iCharger |
1 x | Propadapter for motor A60-V2 |
1 x | Backmountset complete A40 |
2 x | Shaft for A60-L V4 |
1 x | Shaft for A60-L (140mm) |
1 x | Spikes Band (5 m) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Motor Mega AC 16/07/03 |
1 x | Motor Mega AC 16/20/02 |
1 x | Cinta Goldfix 1m |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | BULL MØ1 2.600mm GREEN |
1 x | BULL MØ1 2.600mm ORANGE |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
2 x | Beech dowels 4.0 x 1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Connectors banna oro 2 mm (M/F) |
2 x | XH female balance (5S) connector (2 pcs) |
2 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Autogyro Cierva C30 Spain |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | AXI 2820/8 V2 |
1 x | Propeller APC 8x4 Electric |
1 x | AXI 2814/16 V2 Long |
1 x | Angle support XT60 conector |
1 x | Motor A200-8 |
1 x | Size "M" motor holder for class 400 |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | FesEx-Uni6 System |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Cooler motor type 150 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | FELIX JR Yellow/Black 1750 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors DEANS (T) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Program card KAVAN PRO |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | AXI 2814/20 V2 |
1 x | VM 2014/27 rear |
2 x | AXI 2808/16 V2 |
1 x | Support pumb/filter Xicoy X45 |
1 x | Motor mount M |
1 x | Electric coversion set |
1 x | VIPER SL YELLOW PNP 2270 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | 30 cm DEANS female connector |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Gold antispark 5,5 mm plug |
1 x | Conector BEC female (10 pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | MPX Sub-D Adaptor |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Connector CAN 15 |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Gold antispark 4 mm plug |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | PHASOR RACE 2035/2100 2D |
1 x | Propeller POWER-PROP 7x7 |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Propeller APC 11x3.8 SF |
1 x | Prop Holder AXI 41xx V2 |
1 x | Propeller APC 10x4.5 MR |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 2808/24 V2 |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
2 x | AXI 2808/16 V2 Long |
1 x | AXI 2826/12 V2 |
1 x | AXI 2820/12 CYCLONE |
2 x | AXI 2814/6D V2 |
1 x | AXI 2808/20 V2 Long |
1 x | AXI 2826/10 V2 |
1 x | Universal Prop Saver |
1 x | AXI 2217/20 V2 |
1 x | AXI 2814/10 V2 Long |
1 x | AXI 2204 Multicopter |
1 x | Prop Saver for AXI 22xx/xx |
1 x | AXI 2820/12 V2 |
1 x | Propeller APC 12x6 Electric |
1 x | AXI 2212/26 V2 |
1 x | AXI 2820/14 V2 |
1 x | Propeller APC 11x7 SF |
1 x | Motor A20-26 M EVO |
1 x | Motor A50-16 S V4 |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Motor A20-20 L EVO |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Cooler motor type 400 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Motor A50-12 L Glider |
1 x | Support FUEL DOT V3 |
1 x | Motor A30-12 L V4 |
1 x | Support Pitot JETI |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Motor A30-10 XL V4 |
1 x | Hacker A30-S Radial Set |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Motor A40-10S V4 14-Pole |
1 x | Motor A20-20 L EVO |
1 x | Motor B40-10 L |
1 x | Head upper part |
|
26,443.18EUR |