2 x | BALSA triangular 8x8x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
2 x | Beech dowels 3.0 x 1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
3 x | BALSA triangular 15x15x1000 mm |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Surface Indicator Gauge Small |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Angle measurer |
1 x | Medidor ángulos y/o incidencias |
1 x | Interface Realflight Simulator |
1 x | GameCommander USB Universal |
1 x | RF9 Flight Simulator with Spektrum Controller |
2 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Extension silicon 100 cm (Graupner) |
2 x | Extension silicon 10 cm (Graupner) |
1 x | Extension 90 cm (Futaba) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Extension silicon 35 cm male (Futaba) |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Extension 15 cm (Futaba) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Extension silicon 100 cm (Futaba) |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Premium servo extension 50cm |
2 x | Prolongador S-Bus JR/JR 20cm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Futaba Female 40 cm extension |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Premium servo extension 75cm |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Circlick securite |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Straightened threaded rod M2-1m |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | 200 mm extensión servo HITEC/JR |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension silicon 30 cm female (Graupner) |
3 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Cabel "Y" 15 cm |
2 x | Cable S.BUS 3 salidas 300 mm |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | PS-050 TONEGAWA Servo |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | DLE 55 carburetor |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
2 x | Extension Arm for Carburetor |
1 x | Propeller diller for DLE170 |
1 x | Blocking screws M6 gas engine |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Extension 30 cm (Futaba) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Extension silicon 50 cm (Graupner) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Pine wood slat 10x10x1000 mm |
1 x | PROFI Box JETI |
2 x | Support Filtro FESTO |
2 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Jeti Advance Pro Program Card |
1 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | Support Pitot JETI |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | JetiBOX |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Kontronik ProgUnit |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Blades 330mm |
2 x | 2,3 mm Prop Adapter M6 |
2 x | 4 mm Prop Adapter M8 |
1 x | USB Mini Camera endoscope |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Slave-cable USB Easy Sim |
1 x | 5 mm Prop Adapter M8 |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Angle of incidence meter |
1 x | Glow Plug Clip 1.3 Ah |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Connector Sub-D 2+5 Female |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Field folding model stand |
1 x | 3 mm Prop Adapter M6 |
1 x | Carbon plate 350x150x3.0 mm |
1 x | 3.2 mm Prop Adapter M8 |
2 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Futaba male 40 cm extension |
3 x | Extension lead 15 cm Multiplex |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Premium servo extension 100cm |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Premium servo extension 25cm |
1 x | Extension Arm for Carburetor (red) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | SAITO FG-36 carburetor |
1 x | EME 55 cc carburetor WALBRO |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Cap Hispano Aviación |
2 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | Shirt Hispano Aviación |
2 x | Vest clothes Hispano Aviación |
1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Filler Gauges |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Head core bushing |
1 x | LA500 nose |
1 x | Quick hose connector 3-3 mm |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | 500 ccm gasoline fuel tank |
1 x | Harness for transmitter JETI DUPLEX |
1 x | 3 mm Prop Adapter M6 |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | Ciano KAVAN Thick 20g |
1 x | Socket Head Screw M2,5x12 |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Socket Head Screw M2x12 |
1 x | Balsa panel 10x100x1000 mm |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Tail support (2 pcs) |
1 x | Side rudder |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Blade holder lower |
1 x | Motor wall |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Side Plate |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Wheel keeper washer |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Baal link 4/14/4 (5 pcs) |
2 x | Birch plywood plate 600x300x1.2 mm |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE |
1 x | OS 37 SZ-H, Piston |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Futaba 20 mm servo arm |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Servo Mount S (red) |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Ferrita 17x10x6.5 mm |
1 x | Servo Mount M (blue) |
1 x | Threaded insert M6 (10 pcs) |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Ferrita con funda |
1 x | Screw M3x16 |
1 x | FIALA Propeller 22x10 |
1 x | FIALA Propeller 16x6 |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | BETA 1400 ARF Red |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | 4 mm Prop Adapter M8 |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | 2 mm Prop Adapter M6 |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | 5 mm Prop Adapter M8 |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 20x15 Falcon electric V2 |
1 x | Kit wheel loader 966G II without electrics, without hydrauli |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | Gasket carb - intake manifold for ZG 74B/ZG 80G |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Cylinder for ZG20 |
1 x | Reed valve for DA 50-R |
1 x | Extension 7.5 cm |
1 x | DA-50 Carburator |
1 x | |
1 x | Cylinder gasket per 1 for ZG 74B/ZG 80B |
1 x | Cilinder joint for G230RC/G260RC |
1 x | Intake tube ZG 74/80, DA85, VM 170-420 with special screws |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26 |
1 x | Ignition module ZG 38/S/SC |
1 x | Ignition for ZG 20/26 |
1 x | Carburettor Intake Bend for ZG38 |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
1 x | Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D |
1 x | Header ZG 45/62, "wide" |
1 x | Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R |
1 x | Cable video GoPro and 5V cable |
|
10,032.66EUR |