1 x | Motor DLE 170 M- Paramotors |
1 x | Motor DLE 200cc Premium Muffler |
3 x | Silent-blocks DLE 170M |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | X-RAY Micro QR (Elevator) |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
2 x | X-RAY Micro QR |
1 x | TAKEO 3.6m electric |
2 x | BABY glider drawings (Aero-naut) |
2 x | Glider IKARUS |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
2 x | Jeemo Dolly |
3 x | Set stickers JEEMO "Andy" |
1 x | XICOY X45 rail |
1 x | Screwdriver for Torx® TX6 |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Yellow smoke canister 100 g |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | CC 02 |
1 x | Miniature brass strap hinge, 1 m |
1 x | Ventral support for AX-18/AX-60 |
1 x | BALSA triangular 10x10x1000 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Remote electric ignition system |
1 x | M3 Maxi ball link (2 uds) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Ball link M2,5 (10 pcs) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | LOWER TOW HOOK |
2 x | Horn 5/20 with M2 Bearing |
1 x | Z Bender - S Type Tool |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Crimping tool |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Dust collector for mould cleaning |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
2 x | Horn 6/27 with M3 Bearing |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | BD-5 Pro ARF |
1 x | Glider PIROL |
2 x | E-FUN BUG (ROI-Import) |
2 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
1 x | Fuselage Bags JEEMO |
2 x | X-RAY Micro QR (Fuselage with canopy) |
2 x | Pipa 3D F-16 Scale 1/6 |
1 x | Wings Bags JEEMO |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | SunCover 110/120/140 Class (SebART) |
1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
1 x | SunCover 2.6 Class (SebART) |
1 x | Wings carryng bags 30 class (SebART) |
1 x | Avanti S 2.3m Jet WHITE/BLUE (SebArt) |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
1 x | Avanti S, Cockpit sunCover (SebART) |
1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
1 x | Avanti XS Jet , Carrying bags (SebArt) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Conector BEC female (10 pcs) |
1 x | Conector MR-60 (pareja) |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Indoor landing gear set |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | 25 mm gas motor standoff |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | Clip mini fixing for wing (2 pcs) |
2 x | 4 mm M3 red control terminal (4 pcs) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 100 mm rods set for direction control |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | DINO Glider ARC |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Small aluminium horn red (2pcs) |
1 x | Long horn 50x26 |
1 x | RH long aluminium horn (2pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | White aluminium 230 mm landing gear |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 15 mm gas motor standoff |
1 x | 12 mm floating pad (49 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | 80 mm rods set for direction control |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | Cable coupler M2 (10 uds) |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 90 mm rods + T patellas set for direction control |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | 50 mm gas motor standoff |
1 x | Aluminium ignition bad (blue) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Allen wheel collar M4x6 |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Angled clevis with threaded rod M3 |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Aluminium battery holder red |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | 40 mm gas motor standoff |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | BABY glider (Aero-naut) |
1 x | Gracia Maxi ARF (Top Model) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | 6 mm M3 variable horn |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | 20 mm gas motor standoff |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | 5 mm M2 variable horn |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Horn with ball 40x30 |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 6/35 with M3 Bearing |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | 5 mm M2 variable inclined horn |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Cable coupler M3 (10 uds) |
2 x | Allen wheel collar M4x4 |
1 x | Black large kwik link (10 pcs) |
1 x | Aluminium ignition bad (red) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | 10 mm gas motor standoff |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Cable control set |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Horn 5/10 with M2 Bearing |
1 x | 45 mm rods set for direction control |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | 20 mm carbon horn |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Allen wheel collar M3x3 |
1 x | 30 mm gas motor standoff |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Horn mando long (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Glider STROLCH |
1 x | Coupling for 3 mm axis |
1 x | FOX 3000 mm, Fuselage (FMS) |
1 x | F-16 Scale 1/6 G3 Airex Deco: AF 916F |
|
37,196.60EUR |