7 x | Strip 2,5x1,25x330 mm |
4 x | 4 LiPo XH>EH adapter |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
6 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
5 x | Connector Sub-D 2+5 Male |
4 x | DPS Switch JR/JR |
6 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
4 x | CC 03 |
4 x | Cabel charger transmitter GRAUPNER |
10 x | 3 LiPo XH>EH adapter |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | CM-3 |
5 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
8 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
7 x | Universal Colour Paste deep black 250 g |
3 x | Spannlack 1000 ml |
5 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
7 x | Universal Colour Paste white 50 g |
6 x | Me-163 |
6 x | Spray adhesive AEROFIX 2 |
4 x | Painting GHT Lexan Black 150 ml |
7 x | 20 g tin paste |
5 x | Partall paste 650 g |
6 x | 1000 ml sealer (DOPE) |
5 x | Plasti Dip Liquid Tape 429 ml orange |
6 x | Hobbylite Filler, Balsa colour |
10 x | Spray EC Red 400ml |
4 x | Presto SF Light Filler styrene-free (420 g) |
5 x | Spray Graphit 33 |
5 x | Solvent Plasti Dip 1000 ml |
4 x | Nitroverdu 500 ml |
9 x | Spray adhesive INFUTAC (Clear) 500 ml |
6 x | Plasti Dip Liquid Tape 429 ml black |
6 x | Plasti Dip Liquid Tape 429 ml black |
6 x | |
4 x | 500 ml sealer (DOPE) |
3 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
3 x | 1,6x1000 mm 2:1 black termoretract tube |
3 x | Squared carbon wing joinner 5x5x220 mm |
2 x | Brass control horn M2 large for wire (2pcs) |
5 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
3 x | Beech dowels 3.0 x 1000 mm |
3 x | de Havilland Vampire (Rc Factory) |
2 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
3 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | TP/TopFuel - XH 2/3S Adapter |
4 x | XH female balance (3S) connector (2 pcs) |
2 x | Horn mando small (2 pcs) |
1 x | PowerBox Champion SRS |
4 x | ABS Strip 1.0x3.0x1000 mm |
4 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Silicone black 0,5 qmm wire ( 25 m) |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
2 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | 12,7x1000 mm 2:1 green termoretract tube |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
4 x | Opale Rucksack |
4 x | CC 01 |
4 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
3 x | Connectors banna oro 2 mm (M/F) (ultralight) |
6 x | 6,4x1000 mm 2:1 blue termoretract tube |
5 x | Skyray (RBC Kits) |
2 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Silicone red 0,5 qmm wire ( 25 m) |
5 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
5 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
6 x | MIG 29 3D RTF Red Start SET + Gyro |
3 x | Extra-long adjustable aluminium control horn 2,8x34 |
4 x | White silicone 0,25 qmm wire (150 m) |
1 x | BALSA trip 2.0x2.0x1000 mm |
3 x | Beech dowels 4.0 x 1000 mm |
1 x | Adjustable brass horn threaded M3 |
3 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
4 x | Linden wood slat 3.0x3.0x1000 mm |
3 x | Para-RC Mix |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
4 x | Parachute BACKUP X100 |
4 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Towing hook |
4 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Canopy F9F Panther (Aero-naut) |
2 x | Blue silicone 0,5 qmm wire (50 m) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
4 x | 3,2x1000 mm 2:1 black termoretract tube |
4 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | LUCAS pilot ARTF |
2 x | BEC 3A FOXY |
6 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
4 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | Round Rod 3,0x1000 mm |
3 x | BALSA trip 5.0x5.0x1000 mm |
5 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
4 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | Towing hook |
3 x | 15 mm reinforced hinge |
2 x | Cable control set |
1 x | External LED's (2 pcs) |
2 x | Copier 2x20 cm pcs |
7 x | Strip 1,5x1,5x330 mm |
1 x | Horn mando long (2 pcs) |
7 x | Carbon fiber flat 1000x6.0x0.8 mm |
3 x | Carbon fiber rod 3.0 mm x 1000 mm |
3 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
2 x | Horn 20x28,5 mm (2 pcs) |
2 x | MIG 29 EDF |
5 x | Green silicone 0,25 mm² wire (25 m) |
2 x | Tow hook for tug |
3 x | 6 mm red aluminium threaded horn with patella |
6 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
3 x | Conector BEC female (10 pcs) |
4 x | ABS Strip 1.0x2.0x1000 mm |
3 x | Straightened rod Ø 6.0 mm x 1000 mm |
7 x | 5 LiPo XH>EH adapter |
3 x | Silicone black 0,75 qmm cable ( 1 m) |
3 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
2 x | A/C quality beech plywood 600x300x1.5 mm |
3 x | Mini Avanti S 1.4m white/red |
3 x | F9F Panther (Aero-naut) |
4 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
2 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
4 x | 1 m servo "Premium" wire (white/red/blue) |
3 x | OBECHI sheet 2.0x3.0x1000 mm |
3 x | Cable with accesories |
5 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Servo-V-Limiter 5.2V |
3 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | Pine wood slat 10x10x1000 mm |
2 x | Extension for LC-Display 50cm |
3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | PowerBox MagSensor red connector |
4 x | Paint gun for sprays |
1 x | DPSI RV Mini 6 (2008) |
3 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
5 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | 6 mm blue aluminium threaded horn with patella |
3 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | PowerBox ROYAL SRS |
1 x | DPSI LR-S (with push buttons) |
3 x | Brass rod Ø 1.5 mm x 1000 mm |
3 x | Fixed launching hook |
3 x | ABS 500 x 400 x 1,5 mm (white) |
3 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
2 x | Paramotor BackPack XXS 2 |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | DPSI RV Mini 5 (2008) |
4 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
3 x | Wing OXY 5,0 m2 |
4 x | Brass rod Ø 0.5 mm x 1000 mm |
3 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Horn DU-BRO 1/2 (2 pcs) |
3 x | ARAMID honeycomb 1300x2600x2 mm |
4 x | Windsock Ozone L -1200 mm |
4 x | Straightened rod Ø 3.0 mm x 1000 mm |
3 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
3 x | ABS 500 x 400 x 2,0 mm (white) |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
3 x | BALSA trip 4.0x4.0x1000 mm |
1 x | DPSI RV Mini 6 Magic |
4 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | 6 mm M3 variable inclined horn |
3 x | Vasa model Catapult |
6 x | 30 cm BEC cable (female) |
2 x | Brass control horn M2 long for wire (10pcs) |
5 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
6 x | ABS Strip 1.0x4.0x1000 mm |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
3 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
4 x | Male Prolonger TP 4/5S |
4 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | BIG MOSNTER |
4 x | ABS I Strip 10x5x1000 mm |
1 x | Tank GFK Opus/JEt 300 ml |
3 x | YAK-23 "FLORA" (RBC Kits) |
1 x | Capstan of plastic 88x30x36 mm |
2 x | DC Small for MultiLog & UltraLight |
5 x | Buy Perforated film 145 cm / 50 m |
4 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Parachute PV6 for F3J |
3 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Hinges 7x12 mm (20 pcs) |
3 x | Head upper part |
5 x | PVC 0,14 qmm servo wire Futaba (5 m) |
2 x | Remolcador "Jonny Hafenschlepper" |
4 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Wheel keeper washer |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
3 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Bidule 55 V3 2460 mm |
3 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
4 x | XH female balance (7S) connector (2 pcs) |
1 x | MYSTIQUE 2.9 m ARF |
1 x | Metalic nose for PROJETI |
2 x | Three-position switched channel, short |
1 x | Carbon blade 230 mm |
3 x | Connectors DEANS (T) |
4 x | MAX pilot ARTF |
3 x | Silicone black 4,0 qmm wire (25 m) |
1 x | DPSI Micro MPS |
1 x | Para-RC "RC-Evo-Cross" Rescue |
5 x | XH male balance (3S) connector (2 pcs) |
1 x | Carbon fiber rod 14 mmx1000 mm |
2 x | Blade holder center GFK 0,5 mm |
7 x | Connectors banna gold 5,5 mm (M/F) |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | F-16 Scale 1:6 (1.630mm) |
4 x | Rafale C (Aero-naut) |
2 x | Dean "T" - Futaba Adapter |
1 x | Jet Pipe for ASPIRE 2m JMF |
1 x | DPSI RV Mini 5 Magic |
2 x | MultiLog Altimeter |
2 x | Towing hook <3m |
7 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
6 x | Round Rod 1,5x1000 mm |
1 x | PowerBox Evo |
2 x | Rudder |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
3 x | ABS 500 x 400 x 1 mm (white) |
2 x | PWC4 wing/fuselage connector for 4 servos |
5 x | Optotronix Aurora Plug |
2 x | DUPLEX R12 EPC receiver 2,4GHz |
2 x | Bearing housing |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Battery RX JETI LiIon RB 5200 7.2v |
5 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Bidule 170 ARF 3.48 m |
2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
4 x | Conector BEC male (10 pcs) |
6 x | 30 cm BEC cable (male) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | DPSI Micro - RCS RV |
1 x | XH female balance (5S) connector (2 pcs) |
2 x | Motor mount EDGE 540 48" |
2 x | Anchor 25 mm (2 uds) |
2 x | Fiberglass plate 350x150x0.5 mm |
1 x | Extension for SensorSwitch 60cm |
1 x | Conector JR Servo female (10 pcs) |
2 x | Motor wall |
1 x | Fascination 3600 mm (Top Model) |
3 x | Mini AVANTI S EDF 80MM RTF |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Motor mount VANQUIST 48" F3A |
3 x | 4,8x1000 mm 2:1 red termoretract tube |
2 x | Set Altimeter SHRead |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
3 x | Avanti S 1.8m Jet White/Blue + Landing gear |
1 x | Receiver DUPLEX R9 EX 2.4 GHz |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | Electric Landing Gear GALEB G4 |
2 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
4 x | PVC 0,14 qmm servos wire Graupner (100 m) |
3 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
3 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
2 x | BlueCom™ Adapter (Android / WP) |
3 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
2 x | Rotorshape Elevator |
1 x | Ion Pro, Canopy (JP Model) |
1 x | Hinge 4x14 mm (20 pcs) |
3 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | DIVA cabin cruiser |
6 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | CHALLENGER Indoor |
6 x | JETImodel Addcap 820 |
6 x | CRACK YAK (Mini) 600 mm |
4 x | MXS-C (Mini) Blue |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
3 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Head core bushing |
2 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | SBEC Jeti |
3 x | Silicone black 0,5 qmm wire ( 1 m) |
2 x | 1,2x1000 mm 2:1 black termoretract tube |
3 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
3 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | Regulador NAVY 540R |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
4 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Propeller diller for DA50, DLE55 red |
3 x | White silicone 0,25 mm² wire (25 m) |
7 x | 2 LiPo XH>EH adapter |
3 x | Glass fabric 25 g/m² (1 m²) |
1 x | MPX Support |
2 x | Motor Set CHALLENGER Indoor |
3 x | Small pinned hinge (6 uds) |
2 x | Horn 6/20 with M3 Bearing |
4 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Silicone black 1,0 qmm wire (100 m) |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
3 x | PPM Encoder Module |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
2 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
2 x | MPX PCB "Gender-Changer (5 pcs) |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
5 x | XH male balance (2S) connector (2 pcs) |
2 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
4 x | Buy Perforated film 100 cm / 50 m |
1 x | Side Plate |
3 x | Circlick securite |
9 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Horn 5/10 with M2 Bearing |
1 x | Variable Flow Smoke Pump System |
1 x | Bearing 3x6x2,5 |
2 x | Fiberglass 25 g/m² 5000x1270 mm |
3 x | Tube Pitot to PIXHAWK |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
3 x | Gates hinge |
2 x | 25 mm reinforced hinge |
1 x | Astra (Top Model) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Motor A60-5XS V4 28-pole kv420 |
3 x | |
1 x | Carbon plate 350x150x2.0 mm |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
2 x | Motor holder for AC 28/7 |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
3 x | Round Rod 4,0x1000 mm |
2 x | Nut M2 securing |
2 x | Cooler motor type 400 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
3 x | Head spacer |
3 x | Cooler motor type 280 |
1 x | Capstan of plastic 125x72x45 mm |
1 x | PowerBox iGyro SRS + GPS Modul |
4 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Axle for AXI 2820/xx motors |
2 x | Connectors MPX black female |
2 x | DPSI Ampere battery backer |
1 x | Axle for AXI 2212/xx motors |
1 x | Tail support (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Silicone red 6,0 qmm wire (25 m) |
3 x | CC 02 |
1 x | Magnetic Connect locking system |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | ASPIRE Red ARF 2.000 mm, Fuselage |
3 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Altimeter Altis V4 |
2 x | Futaba 20 mm servo arm |
2 x | Motor Mega AC 16/25/03 |
3 x | PVC transparent black termo-retract battery 185 mm (1 m) |
6 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
2 x | Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART) |
3 x | Foam plastic plates (310x210x3 mm) |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | DUPLEX R7 receiver REX Assist |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | SPARK Switch 5.9v |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
2 x | SlowFlyer control horn (3 pcs) |
5 x | Circlick securite |
1 x | Charging Extension 50cm for 2 Battery |
6 x | Protective Cover for wires Ø 20 mm 1000 mm |
6 x | XT-60 connector (female) |
3 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Multi-adapter balancer JST - TP |
3 x | Protective Cover for wires Ø 10 mm 1000 mm |
2 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
2 x | Sandpaper file 13 mm |
1 x | Axle for AXI 2808/xx motors |
2 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Axle for AXI 5330/xx motors |
2 x | MPX screwable clips (4 pcs) |
2 x | TrainerCord (master-learner) |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Motor Mega AC 16/07/12 |
2 x | Banna gold connector 2,5 mm (M/F) |
1 x | XT-60 connector (male) |
4 x | Blades 330mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | Hitec 30 mm servo rounded arm |
4 x | Protective Cover for wires Ø 3 mm 1000 mm |
3 x | Prolonguer for Balancer Thunder Power 6S |
1 x | 18 mm wing servo holder |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
3 x | Windsock Ozone L - 700 mm |
2 x | BD-5 Pro ARF |
4 x | XH female balance (2S) connector (2 pcs) |
3 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
3 x | RH long aluminium horn (2pcs) |
1 x | TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017 |
2 x | White silicone 0,25 qmm wire (100 m) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Motor Mega AC 16/25/04 COMBAT |
4 x | Connector CAN 15 |
7 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Receiver R7008SB FASSTest |
3 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | ODYSSEY CUST ARF 2190 mm |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Mounting base Ms 12 mm |
3 x | Connectors banna oro 2 mm (M/F) |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
3 x | Long Switch On/Off micro |
1 x | SPARK Switch 12v |
1 x | Servo slow down unit (0,7-14,7 sec ) |
3 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | Motor A10-7 L 4,4:1 |
2 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Spinner 55 mm White (Kavan) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
4 x | ABS Strip 1.5x6.0x1000 mm |
1 x | A40 Backmountset complete |
1 x | Motor mount for 1200 mm models |
1 x | 10 mm dogdrive props |
5 x | 2 mm male connector (2 pcs) with safety connector |
2 x | Strip 3,5x1,75x330 mm |
1 x | Bags wings/rudder ASPIRE |
3 x | Cooler motor type 300 |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | Futaba 52 mm servo arm |
3 x | Bidule 111 3000 mm Canopy |
1 x | MAX BEC 2 |
1 x | Futaba 30 mm servo arm with M3 ball link |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | Ferrita con funda |
1 x | Motor Mount for Multiplex FunJet |
3 x | 50x45 mm micro-mini servo cover |
1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
6 x | Cabel "Y" 30 cm (graupner) |
1 x | Carbon blade 3D 230 mm |
2 x | Red 4 mm connector holder |
4 x | Extension 2/3 lipos JST/C |
2 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Stick coupler Ms 15 mm |
3 x | Multi-adapter balancer JST/C - TP |
1 x | 2 piece mounting frame |
3 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Fail Safe air retract |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Cable coupler M3 (10 uds) |
3 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Frontal support Speed 400/480 |
2 x | Adjustable launching hook |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
4 x | ABS Strip 1.5x2.0x1000 mm |
3 x | Green silicone 0,25 qmm wire (50 m) |
2 x | Rigid coupling brass Ø 4 mm L: 25 mm |
3 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
3 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
2 x | Round Rod 1.0x3.5 cm |
2 x | Decorative caps, multicoloured |
1 x | Balls 4 mm |
1 x | Head lower part New |
2 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | 65 mm mini servo cover |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | Servo Mount M (blue) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Telemetry interface ALTIS 20 cm |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Switch Cap M (blue) |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
5 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
3 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Z-shaped servo mount |
1 x | Pilot "Goose" (Slimline) |
1 x | Superlight deluxe wheel 56 mm (2 pcs) |
2 x | X-RAY Micro QR (Elevator) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
3 x | Gold antispark 5,5 mm plug |
3 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
4 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | XH female balance (8S) connector (2 pcs) |
1 x | SPARK Switch 7.4v |
3 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Swashplate metal LAMA |
5 x | Round Rod 2,5x1000 mm |
2 x | Emcotec SPS Magnetic Switch Actuator |
1 x | ODYSSEY BLACK Eagle ARF 2190 mm |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
1 x | Telemetry interface ALTIS 12 cm |
1 x | Safetyclip MPX (6 pcs) |
2 x | TopFuel LiPo 25C-ECO-X 900mAh 2S |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
2 x | Extension Arm for Carburetor |
1 x | OSD Telemetry sensor |
3 x | Extension 5 lipos JST/C - JST |
3 x | Film release agent PVA 25 ml |
1 x | Bluetooth Adapter JET CENTRAL |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
2 x | Metal clevis M2,5 (10 uds) |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
6 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | PowerPack 2.5X2 PRO |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Resistor 3W 5% OR47 |
3 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
3 x | CC 05 |
2 x | M3 Maxi ball link (2 uds) |
1 x | Connectors MPX male (PIN double) |
2 x | Horn with ball 55x40 |
2 x | EWC3 100 cm wing connector |
1 x | R617 FS 2,4 GHz receiver |
3 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Propeller CFK 15x15 |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Electric Fuel pump |
3 x | Pilot "Anthony" (Slimline) |
6 x | ABS Strip 1.5x8.0x1000 mm |
3 x | Surface Indicator Gauge Small |
3 x | 12.7 mm 2:1 black termoretract tube |
3 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | A30-M/L/XL Backmountset complete |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Glider KNIRPS |
5 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
4 x | 5 line servos wire black (1 m) |
1 x | ASPIRE Red ARF 2.000 mm, Set Alas |
2 x | XH LiPo extension lead |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Motor Mega AC 16/07/03 |
2 x | Spinner propeller pleg. 38 mm / 4 mm |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | PowerBox PowerExpander SRS |
1 x | XPower XC4226/12 LS |
1 x | Superlight deluxe wheel 40 mm (2 pcs) |
1 x | BU 131 Jugmann Panel Instrum. trasero |
1 x | F-104 Starfighter USAF (SebArt) |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Futaba Radio Case |
4 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
3 x | XH female balance (4S) connector (2 pcs) |
2 x | Washer 2.2×4 |
1 x | Size "M" motor holder for class 400 |
1 x | Motor mount class 48" |
1 x | Servo Fork |
2 x | Horn with ball 40x30 |
1 x | 300 Newtons FEMA absorber |
3 x | Conector FUTABA Servo female (10 pcs) |
3 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | PowerBox iGyro 1e |
1 x | Head runner |
1 x | Hitec 20 mm servo arm |
3 x | Futaba Female 40 cm extension |
2 x | BlueCom™ Adapter (iOS) |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | T-shape holder metal LAMA |
2 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
4 x | Buy Perforated film 100 cm / 20 m |
1 x | Electric Landing Gear F9F COUGAR |
2 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Metal clevis M3 (10 uds) |
1 x | Axle for AXI 2217/xx motors |
6 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | White spinner propeller pleg. 36 mm / 5 mm |
3 x | LA500 cyclic central part |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
4 x | 2,5x60 mm allen screwdriver |
3 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Tank + hopper Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
3 x | Short Switch On/Off micro |
2 x | |
2 x | Equipment set XL |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | PowerBox Battery 4000 |
1 x | 57 mm micro-mini servo cover |
3 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Axle for motor A20-S (3 uds) |
1 x | 45 mm aluminium spinner (Kavan) |
2 x | Chopped glass fibre strands 3 mm |
1 x | TopFuel LiPo 20C-ECO-RX 500mAh 2S |
1 x | Propeller CFK 20x13 |
1 x | DPSI Micro - RCS |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | HERON RR |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
1 x | ODYSSEY Horns Set GFK |
2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
4 x | Protective Cover for wires Ø 6 mm 1000 mm |
2 x | Silicone black 0,75 qmm wire ( 25 m) |
2 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Extension for SensorSwitch 30cm |
3 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
5 x | Round Rod 1,0x1000 mm |
1 x | Central piece 72 mm 0º |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
3 x | BALSA triangular 15x15x1000 mm |
1 x | Welder 100W/200V |
1 x | Glidder Mü13e (Bergfalke) |
2 x | Spare white 38-45 mm spinner |
2 x | M3 Maxi ball link (2 uds) |
4 x | 4,8x1000 mm 2:1 black termoretract tube |
2 x | 19 mm 2:1 black termoretract tube |
2 x | EWC3 40 cm wing connector |
4 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | LA500 housing-upper cyclic |
4 x | Ball joint long |
2 x | Bags de Luxe ODYSSEY |
3 x | Bag connector 2 mm |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Propeller APC 11x3.8 SF |
1 x | PIN Connector female (100 pcs) |
1 x | Superlight deluxe wheel 75 mm (2 pcs) |
1 x | DPSI 2001 RV |
2 x | Switch moment button, 2 functions, long FUTABA |
1 x | DUPLEX R12 receiver REX Assist |
2 x | MPX Sub-D Adaptor |
1 x | Central piece 42 mm - 2,5º |
1 x | Central piece 47 mm + 2,5º |
4 x | Round Rod 6,0x1000 mm |
2 x | MPS Gas-Cap-Powerswitch |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Propeller APC 13x4 Electric |
1 x | LA500 Blades |
1 x | X-RAY Micro QR |
2 x | Red 3m5 mm connector holder |
2 x | PVC grid straight 290x185x0.32 mm |
3 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Motor A30-10 XL V4 |
1 x | Kit repair carburator DLE-85/111/120/222 |
3 x | Glass fabric 49 g/m² (1,27 x 20 m) |
4 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Rear bearing for motor 35/40 cc |
2 x | Trike XL motor set (motor+esc+prop) |
1 x | Switch Cap L (silver) |
1 x | TopFuel LiPo RX 25C-ECO-X 800mAh 2S |
2 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
4 x | Round Rod 5,0x1000 mm |
1 x | Bearings for motors hacker A50 |
1 x | Fiberglass plate 350x150x1.5 mm |
2 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Selfstart electronic switch |
1 x | Cooler motor type 150 |
2 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
2 x | Extension 6 lipos XH > EH |
3 x | SIMtransmitter 6 Mode 2 |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | Propeller APC 9x4.7 SF |
4 x | UBEC 6A KAVAN |
1 x | 90x75 mm standart servo cover |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
4 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Railing L250 mm (10 pcs) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
3 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | TopFuel LiPo 35C-POWER-X 2400mAh 2S |
1 x | Propeller APC 9x4.5 Electric |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Propeller APC 14x8.5 Electric |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | Avanti S 1.8m Jet White/Blue |
1 x | Connectors MPX female (PIN double) |
3 x | Battery FUTABA 18MZ |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
2 x | Head core |
2 x | Indoor Brushed motor kit |
2 x | EDGE 540-A 105" (2660 mm) |
1 x | METEOR 1.000 mm kit |
1 x | Dual Sequencer Gear and Canopy |
3 x | Large flex hinge (12 uds) |
1 x | Spinner 100 mm CFK |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
2 x | Propeller balancer |
2 x | DLE 55 Muffler |
1 x | ESC MEZON 120 Lite |
3 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
3 x | Pin hinge 26x11 mm (10 uds) |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Parachute P4 |
1 x | P 17×5.8 Prop-2PCS/PAIR |
4 x | Ferrita 14x8x5.5 mm |
1 x | Wing conexion 2 servos Futaba 50 cm |
2 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Blade holder center |
1 x | ODYSSEY Blue ARF 2190 mm |
2 x | Raer wall |
1 x | Propeller CFK 12X6 |
1 x | Light System |
1 x | PowerBox 12 |
2 x | ALBATROS 3.0 m (orange/white) |
1 x | Horizontal servo holder |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Boat 140 mm |
1 x | Paramotor Trike XL |
2 x | Propeller APC 11x7 Electric |
2 x | XH male balance (6S) connector (2 pcs) |
1 x | Motor holder AXI |
3 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | 90 mm CFK long Spinner fixed by a central screw |
3 x | Small pinned hinge (12 uds) |
1 x | Anchor 50 mm (2 uds) |
2 x | XT-30 connector (pair) |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
2 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
3 x | Flat washer 4.3 mm (20 pcs) |
1 x | KingTech Turbineoil 5L |
4 x | ABS I Strip 20x10x1000 mm |
2 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | SAITO FG-36 carburetor |
1 x | Spinner 60 mm White (Kavan) |
1 x | Engine mounts for .09 - .19 engine |
1 x | 40 mm black plastic spinner for fixed propeller |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Nut M2 |
1 x | Propeller diller for EME35 and DLE35 |
2 x | Rotor Mast |
1 x | JM electric Pump |
2 x | Opto Gas Engine Kill Switch |
1 x | Red spinner 40-45 mm |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | DINO Glider ARC |
1 x | Hose clips 6 mm |
1 x | Propeller APC 12x6 SF |
2 x | Blade holder metal LAMA |
4 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | SSPS105 Super Hi-Power servo |
4 x | PSC 6 |
2 x | COPILOT Multiplex |
3 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Antenna 50 mm (2 uds) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Propeller Pleg CAM Carbon 11x10 |
2 x | Moki Pushrod S250 (1 pcs) |
3 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | Ventus 1:4 set of instruments |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
1 x | OPTOTRONIX Aurora LCU |
2 x | 18 mm reinforced hinge |
2 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Piston ring for DLE-30 |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Glider STROLCH |
1 x | Propeller Pleg CAM Carbon 14x9 |
1 x | Axle for AXI 2208/xx motors |
2 x | Rotorshape Autogyro |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | PVC red battery termo-retract 68 mm (10 m) |
4 x | Horn 16,5x20 mm (2 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Central piece 52 mm + 2,5º |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
2 x | Wings carryng bags 50 class (SebART) |
1 x | LA500 Autogyro |
1 x | PowerBUS Lead 60 cm |
1 x | PowerBox iGyro 3xtra |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
4 x | USB interface ALTIS |
1 x | Battery plate |
2 x | Conector JR Servo male (10 pcs) |
1 x | Canopy Sweet / Siesta |
3 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
2 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | DG-303 ACRO 3750 mm (Airworld) |
3 x | Aramid 50 daN 50 m |
1 x | Screws M1,6x6 Allen |
1 x | BABY glider (Aero-naut) |
1 x | 42 mm central piece for 4 blades |
3 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Propeller APC 8x4 Electric |
2 x | Silicone red 6,0 qmm wire ( 1 m) |
3 x | SCHARNHORST Battleship 1:200 |
1 x | Silicone red 1,5 qmm wire ( 1 m) |
2 x | Quicklock washer 2 mm (10 pcs) |
1 x | 25 mm fenders (10 pcs) |
1 x | Shaft sleeve LAMA |
1 x | 28 mm turnbuckle |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Servo TOPMODEL S7520 MG |
2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | TopFuel LiPo 20C-ECO-X 5800mAh 6S |
2 x | DLE 55 carburetor |
2 x | Cabel "Y" 30 cm (Futaba) |
1 x | Switch Cap M (red) |
1 x | Set Wingjoiner carbon ASPIRE |
2 x | Logo 400 SE VBar |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
2 x | JETImodel SINGLE BEC |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
2 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
2 x | SBEC 30 D |
1 x | Motor Mega AC 16/10/03 RACE |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
3 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | SERVO DES 806 Pignons |
1 x | BIELA 25x10 WILGA Propellers |
2 x | Motor Mega AC 22/45/02 E |
1 x | Aero-Master (Aero-naut) |
1 x | KingTech T-Modul 5 in 1 Telemetry |
5 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Balsa panel 6.0x100x1000 mm |
2 x | EWC6 40 cm wing connector |
1 x | Servo Mount S (red) |
1 x | Resistor 3W 5% 2R2 |
3 x | Lense for Spotlights, 20mm |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
5 x | LA500 rotor head core |
1 x | Propadapter for motor A50 |
1 x | Axle for motor A50-L |
3 x | Cabin latch Fox MDM1 4m (pair) |
1 x | DLE 55 Ignition unit |
1 x | Cierva C30 simulated motor |
2 x | PowerBox Smokepump |
1 x | Hitec 52 mm servo arm |
2 x | Cable Cargador FUTABA |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | ODYSSEY Yellow, Rudder |
1 x | SIG Coverall 1.2x1.8 m |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Propeller diller for DLE111 and DA85-150 |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | LED wire (orange - 2pcs) |
1 x | Complet landing gear |
1 x | Spinner 125 mm GFK |
2 x | 11 mm wing servo holder |
1 x | Propeller diller for DLE170 |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
3 x | Male/Female prolonguer for Balancer Thunder Power 6S |
3 x | PVC grid diagonal 290x185x0.32 mm |
1 x | R6106 HF 2,4 GHz receiver |
1 x | Cierva C30 Elevator |
1 x | Motor Mega AC CAR 10 PRO |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Spinner propeller pleg. 38 mm / 4,0 mm |
1 x | Nut M1,6 |
1 x | ESC ALPHA 60A HV |
3 x | Fox 4000 mm with flaps (Airwold) |
1 x | Servo HITEC HS-325 BB |
2 x | 1/12 Pilot "Cougar" |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Piston DLE 55/111/22 |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Switch magnet for gas cap and magnet switch actuators |
2 x | Steel brush wheel with 2.35mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | White spinner propeller pleg. 55 mm / 6 mm |
1 x | |
1 x | DUPLEX R14 receiver 2,4GHz |
2 x | Spinner propeller pleg. 38 mm / 6 mm |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | Spinner 102 mm |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
3 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | 200 Newtons FEMA absorber |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
1 x | Spinner NUT M5 |
1 x | Spinner NUT M8x1,25 |
3 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Motor Mega AC 16/15/07 |
1 x | ODYSSEY Red/White ARF 2190 mm |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Piston ring for DLE-20 |
1 x | Motor Mega AC 16/30/01 |
2 x | Angle measurer |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
2 x | LA500 pre-rotation gear |
1 x | Motor Mega AC 16/15/04 COMBAT |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | Propeller CFK 12.75x13 |
1 x | 58 mm micro servo cover |
1 x | Glider IKARUS |
1 x | Motor RACE 720 Navy 12v |
1 x | Cabling for Fox MDM1 wings |
2 x | Para-RC Trike "RC-Bullix" |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | Propeller CFK 14x8 Slim |
1 x | Swift 5050 mm (Airwold) |
4 x | Futaba Aero Large Case - Internal Foam |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | La Capitania di Venetia accesories |
2 x | Motor Mega AC 16/25/04 |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Potenciometro micro |
1 x | Central piece 52 mm + 5º |
1 x | Alu servo arm double RHINO |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | Motor Mega AC 22/20/03 |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Fan for A60 |
2 x | TopFuel LiPo 20C-ECO-X 4500mAh 3S |
1 x | Fox 4000 mm (Airwold) |
1 x | Lock nut M2 (20 pcs) |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
2 x | ASPIRE Navy ARF 2.000 mm |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Gasket set DLE-120 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
2 x | Hexagonal ball head 2.0 x 50 mm |
2 x | Short adjustable control horn 3x24 |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | PHASOR RACE 2035/2100 2D |
3 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | 46 mm Futaba servo arm tandem with ball link |
3 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | 42 mm white plastic spinner for folding propeller |
1 x | Propeller CFK 18x16 |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | HDT Jet Central |
1 x | Fishing boat Jule Fischkutter |
1 x | Propadapter for motor A50-V3 |
1 x | PowerBox Voltage Regulator (linear) |
1 x | Side rudder |
3 x | Gold antispark 4 mm plug |
1 x | DPS Switch Ampere |
2 x | Esc MasterBasic 90 Opto |
1 x | Motor A40-10S V4 14-Pole |
2 x | SPS 70V 140/280 A |
2 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Motor Mega AC 16/07/06 |
1 x | PowerBox iGyro SRS |
2 x | Extension silicon 75 cm (Futaba) |
1 x | TAKEO 3.6m electric |
1 x | DLE 55-RA Muffler |
1 x | Propeller Pleg CAM Carbon 12x8 |
2 x | 6 mm aluminium horn with patella |
6 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Head lower part |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
2 x | KIRA 600-20 6,7:1 |
2 x | Extension silicon 100 cm (Graupner) |
1 x | Turbine MAMMOTH 25.4 Kg |
1 x | Sheave Pl. 2R. 3 mm |
1 x | PROFI TX fastening rings |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | Spinner 104x131 mm 115 g CFK-BS |
2 x | 13 mm wing servo holder |
1 x | Fully Threaded Steel Rod M3 |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Micro Crystal RX 35.080 Ch 68 |
1 x | Electric Fuel Pump 12V |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | Brushless ESC 30A F-450 |
1 x | XH female balance (9S) connector (2 pcs) |
2 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
3 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
2 x | Coupling bush 5 - 5 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Male connector for 10 pines AWG |
4 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Profile ABS half cane 4x2.5x1000 mm |
3 x | Profile ABS half cane 7.0x1000 mm |
3 x | Rubber profile 8-2 mm 2M |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
3 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | EC-Cutter |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Xplorer4 anemometro |
1 x | Ring 320 mm length (5 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | Glases Ace |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
3 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
2 x | Red smoke canister 65 g |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Cable set PREMIUM, fuselage/wing |
2 x | Kwik link with arm M5xM2,5xL30 |
3 x | ABS angle 4,0x4,0x1000 mm |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Small Crow DLE-170M |
3 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Smoke set "M" |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
6 x | U Profile ABS 8,0x4,0x1000 mm |
3 x | Conector Servo female 4 pines |
3 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Silent-blocks DLE 170M |
1 x | Ball link M2 (10 pcs) |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Long ball link M1.6 (6 uds) |
2 x | Strip ABS 2.0x5.0x1000 mm |
4 x | Profile ABS half cane 5.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
4 x | T-Connector 4.0 mm x 1000 mm |
4 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Oracover Yellow CADMIO 2 m |
1 x | Clip mini fixing for wing (2 pcs) |
4 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
2 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Electric rocket starters (6 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
4 x | L-Connector 1.0 mm x 1000 mm |
2 x | "S" set for planes |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
2 x | White smoke bombs AX-60 (5 pcs) |
2 x | Epoxy Resin L (2.5 Kg) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | 1/4 Pilot "Heidi" |
2 x | 20 mm carbon horn |
1 x | Compact on-board starting system (9724) |
2 x | Ventral support for AX-18/AX-60 |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
5 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | 1/12 Pilot "Langley" |
4 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Glases Flitemaster |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Oracover Black 2 m |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
3 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Allen wheel collar M3x5 |
1 x | Remote electric ignition system |
2 x | Cylinder-piston Assembly 30cc |
1 x | Dremel PERMAGRIT thin lime |
1 x | Ball Link Plier |
3 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | 20x200 mm battery rings |
4 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | 10 mm Quick clamp_L (6 pcs) |
3 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | 100g Flux Paste for Silver Solder |
1 x | Extension 5 lipos JST/C |
3 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
3 x | Aluminun wheel collar 2 mm Ø (4 uds) |
3 x | Round Rod 1,25x1000 mm |
3 x | 3l Smoke oil |
1 x | Miss ULTIMATE 50E Red/Black |
2 x | Locking cable tie 4.6x203 (uds) |
3 x | Angle of incidence meter |
2 x | Connectors banna oro 3 mm (M/F) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Couple M4 for wire (10 pcs) |
1 x | Motor RACE 20 Navy 12v |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Cockpit metalic closing |
3 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Starter Sullivan-STAR 601 |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | ABS angle 6,0x6,0x1000 mm |
3 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
3 x | Profile ABS Square 3 x 1000 mm |
2 x | White smoke bombs AX-9 (10 pcs) |
2 x | Conector FUTABA Servo male (10 pcs) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Dust collector for mould cleaning |
2 x | Fuel line plugs (Silver) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Field folding model stand SebArt |
2 x | ABS Strip 1.0x5.0x1000 mm |
3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Ply-Span 450x600/13g Orange |
3 x | resin-hardener package L-385 with hardener H-385 |
4 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | |
1 x | Indoor hinge with servo arm integraded |
1 x | Intairco CMB Super Filter - 6mm Barb |
1 x | Telemetry interface ALTIS to Futaba |
5 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Ball link M3 (10 pcs, flat ball) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
3 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
3 x | Wheel collar 3 mm Ø (4 uds) |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Opto Gas Engine Kill Switch |
1 x | Extension silicon 30 cm female (Graupner) |
2 x | 28 mm tailwheel unit |
1 x | Micro Switch button |
2 x | ABS angle 10,0x10,0x1000 mm |
2 x | Glass fabric 49 g/m² (1,27 x 10 m) |
4 x | Rubber profile 10-2 mm 2M |
1 x | Cinta Goldfix 1m |
1 x | Canopy Latch |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
3 x | Vacuum bag, 1200 mm x 50 m |
3 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Conector JR Servo male (10 pcs) |
1 x | 100 mm rods set for direction control |
1 x | Xplorer1 anemometro |
2 x | Optical RPM Sensor |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Electronic switch JETI SP6 0-15v/6A |
3 x | Hardener Aero EPH 161 (500 g) |
3 x | Small flex hinge (12 uds) |
3 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
4 x | Profile ABS half cane 8.0x1000 mm |
3 x | Profile ABS half cane 2.5x1000 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
3 x | Oracover Yellow CUB 2 m |
1 x | Bags de Luxe ULTIMATUM 2.0 |
2 x | MAX BEC |
2 x | Connector Sub-D 2+5 Female |
3 x | Hardener Aero EPH 161 (250 g) |
2 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | QUANTUM II 55 Brushless Motor |
3 x | 250 mm / 16 mm Airbrakes |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Motor DLE 430 cc - Paramotors |
1 x | ORACOVER Ferrari red (2 m) |
2 x | 2,0x50 mm allen screwdriver |
1 x | Oracover CARBON Metalic 1 m |
2 x | FX three-position switched channel, long |
1 x | Male connector for 16 pines AWG |
4 x | Round flex hinge (12 uds) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
4 x | Flap hinge (6 pcs) |
1 x | Piston ring for DLE-20 RA |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Glases Aspen |
3 x | Mudguard for 140/165 mm wheels |
1 x | |
1 x | Oracover Verde 2 m |
1 x | Epoxy 40 min (Resin). 5 Kg |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | Interruptor RX/Batterie |
1 x | Glases Nimbus "Black" |
3 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Digital scale up to 40 kg |
3 x | PVC 0,08 qmm Futaba servos wire (5 m) |
2 x | Round Rod 2,0x1000 mm |
1 x | Threaded coupler M2 (10 uds) |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | La Capitania di Venetia 1:50 |
1 x | ABS tube 5.0x4.0x156 mm |
3 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Beech dowels 2.0 x 1000 mm |
4 x | Profile ABS half cane 6.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
2 x | Red smoke canister 140 g |
1 x | Cockpit plastic closing |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Oracover White 10 m |
1 x | Heli blades angle measurer |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Joint with bearing M2 22x5,5 |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Female connector for 16 pines AWG |
2 x | Oracover White 2 m |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
2 x | ABS angle 3,0x3,0x1000 mm |
2 x | 45 mm rods set for direction control |
1 x | Ball link M1.6 (6 uds) |
1 x | Epoxy 40 min (Hardener). 10Kg |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Tape GFK 38 mm |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | USB Mini Camera endoscope |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
4 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Socket head ball link M3 (2 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | White large kwik link (10 pcs) |
1 x | Propeller balancer |
3 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Female connector for 12 pines AWG |
2 x | DYNAMOMETER S-1580 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | SBEC 40 |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Ply-Span 450x600/13g Blue |
4 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
4 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA |
1 x | Small aluminium horn gold (2pcs) |
4 x | Medium pin type hinge (12 uds) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | Cut tube |
1 x | Angled clevis with threaded rod M3 |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
3 x | Profile ABS half cane 2.0x1000 mm |
1 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | ABS tube 7.0x5.0x1000 mm |
1 x | 5 mm M2 variable horn |
3 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Profile ABS triangular 4.0x1000 mm 90º |
5 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
3 x | Cross Connector 4.0 mm x 1000 mm |
1 x | SUS wire 3m (nylon coated) |
3 x | Yellow smoke canister 140 g |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
3 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
3 x | Kwik link with arm M3xM2xL24 |
4 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | MAX BEC 2D plus EX |
1 x | Marker ties (20 pcs) |
1 x | Dremel 3000 130W |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Support GFK propeller ple. 2Bl |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Spring lock washer 4.1 mm (20 pcs) |
3 x | ABS angle 5,0x5,0x1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Glass fabric 25 g (2 m²) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | ABS angle 2,0x2,0x1000 mm |
1 x | AX-60 starters (5 pcs) |
2 x | Green smoke canister 65 g |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
2 x | Smoke set "Glider" |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | "M" set |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Concave-Convex sandpaper file 13 mm |
2 x | 120x60 mm SLH KOVO wheel |
1 x | Jeti Black cap |
1 x | Head Gasket 30cc (3 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | 1/6 Pilot "Buddy" |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | White smoke canister 140 g |
1 x | Medidor ángulos y/o incidencias |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | ABS tube 12.0x10.0x1000 mm |
3 x | White smoke bombs AX-18 (5 pcs) |
1 x | Horn 5/20 with M2 Bearing |
2 x | Rubber profile 6-2 mm 2M |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Piloto Jet "Green" 1/6 Scale |
2 x | Black silicone 0,25 mm² wire (25 m) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
3 x | Ferrita 27x14x7 mm |
3 x | Initior Receiver FRX2 Wireless |
1 x | Intairco CMB Super Filter - 4mm Barb |
3 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Green smoke canister 100 g |
2 x | SCHARNHORST accessories |
1 x | Ball link M3 RPA's-UAV's |
1 x | Z Bender - S Type Tool |
1 x | Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA |
1 x | Dean-T Plug Mold |
3 x | Aluminium wide washer M3 red (4 pcs) |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | Threaded coupler M3 (10 uds) |
2 x | Sealing Iron Sleeve PROF |
5 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Ball Link Plier |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | 1/6 Pilot "Tony" |
1 x | Fuel line plugs (Black) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | Futaba male 40 cm extension |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Control horn long w/ball |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Starter EM Gear Power 250 |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Female connector for 10 pines AWG |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 42,0 mm propeller (left propeller) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Electronic fog horn |
1 x | Yellow smoke canister 65 g |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | PSC 5 |
4 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Rescue 1,8m2 / BackPack |
1 x | Reed valve cage with petals for DA 100/150 |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Ball link M3 (6 uds) |
3 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Extension silicon 25 cm (Graupner) |
1 x | USB HLS prog. interface |
1 x | Short ball link M3 (6 uds) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | 30 cm DEANS female connector |
1 x | Oratex Natural White 2m |
1 x | Vacuum pump P1-N |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Oracover Brown 2 m |
1 x | Foaming agent for epoxy resins 200 g |
3 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Digital weight, angle and balance meter BASIC |
3 x | Stickers-digit for marking |
1 x | Heli digital angle measurer |
1 x | Small aluminium horn red (2pcs) |
1 x | Servo FUTABA S 9670 SV |
1 x | Flat washer 3.2 mm (20 pcs) |
3 x | White gelcoat 1 Kg |
1 x | White smoke canister 100 g |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
3 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Xplorer2 anemometro |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Big Crow DLE-170M |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
2 x | Miss ULTIMATE 50E Yellow/Black |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Conector JR Servo female (10 pcs) |
2 x | Cockpit aluminium closing 4.7g |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | 55% silver electrodes (2 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Exhaust gasket DA50R DA100 DA200 |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Cylynder DLE 20-RA |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | 39,0 mm propeller (left propeller) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Steering arm 16 mm Ø 3 mm |
4 x | Profile ABS Square 1 x 1000 mm |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | Receiver replacement antenna, approx. 15 |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Motor DLE 200cc Std |
2 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | PIX Hawk with accesories |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Yellow smoke canister 100 g |
2 x | SE Ring 350 mm (2 pcs) |
3 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
3 x | Profile ABS half cane 4x1000 mm |
1 x | Epoxy 5 min. 500 g (Hardener) |
3 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Propeller hub spacer 8/5.5 |
2 x | Birch plywood plate 600x300x4.0 mm |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
3 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Tape GFK 50 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Heli blades angle measurer |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | Straightened threaded rod M2-1m |
1 x | Extension 100 cm (Futaba) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Copier 5x20 cm pcs |
2 x | Strip 2,0x2,0x330 mm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | 800TVL CMOS camera for FPV |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
2 x | Field folding model stand |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Universal Filter |
1 x | SE Ring 450 mm (2 pcs) |
1 x | ORACOVER Fluor red (2 m) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 1/4 Pilot "Mike" |
1 x | Extension silicon 30 cm male (Futaba) |
2 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Battery LiPo TATTU 2000 mAh 3S 11,1V 100C |
1 x | Short ball link M1.6 (6 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | 1/12 Pilot "Tom" |
2 x | Balsa panel 1.0x100x1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | DG-303 ACRO 3750 mm, canopy |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Diaphragm set for ZG 74/80B, DA85/100/100L/120/200, VM170/210 |
1 x | 30 cm MULTIPLEX female connector |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Long ball link M2 (6 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120 |
1 x | SUPER DIMONA TC-80 |
1 x | Xplorer3 anemometro |
1 x | 80 mm rods set for direction control |
2 x | Quicklock washer 1 mm (10 pcs) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Glases Innovation Plus |
4 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Tube bender |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Ply-Span 450x600/13g White |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | Spark plug key NGK MVVS |
1 x | Pulley brass 14/2 (2 pcs) |
2 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Mould Resin P 10 kg |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
2 x | Profile ABS half cane 3x1000 mm |
1 x | Lock nut M5 (20 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Metal clevis M2 (10 uds) |
1 x | Threaded insert M5 (10 pcs) |
1 x | VBar Control Touch, midnight black |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
4 x | Blind nut M2 (10 pcs) |
1 x | Pulley brass 16/2 (2 pcs) |
2 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
4 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
2 x | Extension MPX-MPX 20 cm |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Pulley brass 12/2 (2 pcs) |
2 x | Blind nut M5 (4 pcs) |
1 x | LOGO 600 SX (kit) |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Nut for mounting M3 (4 pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
2 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
2 x | Nut for mounting M2,5 (4 pcs) |
1 x | Silicone black 6,0 qmm wire (25 m) |
2 x | Silicone red 4,0 qmm wire (25 m) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Hexagonal Nut M2 (10 pcs) |
3 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Hexagonal Nut M2.5 (10 pcs) |
2 x | Blind nut M6 (4 pcs) |
2 x | Threaded insert M3 (4 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
2 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
2 x | MEKP Harderner 100 g |
4 x | Blind nut M6 (4 pcs) |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Emisora FUTABA T18 SZ + R7208SB |
2 x | Futaba Neckstrap |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Ant. Cable R606/17/08/14FS L:1500mm |
2 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | AIRSPEED SENSOR SBS01TAS |
2 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Miniature brass strap hinge, 1 m |
2 x | Futaba R3006SB T-FHSS 2.4GHz |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
3 x | Cable S.BUS 3 salidas 300 mm |
1 x | Futaba BLS152 - Upper Case |
1 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
2 x | Futaba S9650/9670SV - Upper Case |
2 x | FUTABA 6L + R3106 2.4GHz |
2 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
3 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | HV6150 Digital Servo |
1 x | White smoke canister 65 g |
1 x | SERVO HOLDER |
2 x | Servo MKS HV6130 |
1 x | Gear for MICRO BB |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
3 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Servo MKS HBL550 |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Servo MKS HV1220 |
1 x | Servo MKS HV747 |
2 x | Servo MKS 6100 DS |
1 x | Servo MKS 6100 DS |
1 x | LOWER TOW HOOK |
2 x | Servo Dymond D 37 Eco |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gear set HITEC HS-7950TH |
1 x | Gear set HITEC HS-85 |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo HITEC HS-225 MG |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | VPP system propeller for AXI VPP motors (spare) |
2 x | Cotton Flocks, bag/ 500 g |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Female connector for 20 pines AWG |
2 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Interruptor SPS 70v 60/120A |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | MPX screwable clips (5 pcs) |
2 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Connectors MPX black male |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | 12V Car Adapter |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Charger 220/110v |
1 x | Adapter 3,0 mm M8 |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | 2,3 mm Prop Drive Günther M4 |
2 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 3,2 mm M8 |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 3,2 mm M6 |
1 x | 2 mm Prop Adapter M5 |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 4,0 mm M6 |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | 2,3 mm Prop Adapter M6 |
3 x | 10 mm floating pad (72 pcs) |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | 4 mm Prop Adapter M8 |
1 x | 4 mm Prop Adapter M8 |
1 x | PYRO 650-103 Long Axi |
2 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | 4 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
3 x | 3 mm Prop Adapter M6 |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
2 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
3 x | 15 mm floating pad (30 pcs) |
1 x | 2 mm Prop Adapter M6 |
1 x | PYRO 600-12 |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | KIRA 600-24 6,7:1 |
1 x | KIRA 500-36 6,7:1 |
1 x | PYRO 650-53L EJE LARGO |
1 x | 3.2 mm Prop Adapter M6 |
1 x | KIRA 400-39 5,2:1 |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | KIRA FAI 5F5/4s |
2 x | KIRA 400-34 |
1 x | 6 mm Prop Adapter M8 |
1 x | 6 mm Prop Adapter M8 |
1 x | KIRA 600-30 6,7:1 |
1 x | PYRO 700-56L |
3 x | 3.17 mm Prop Adapter CN-Spinner |
2 x | PYRO 900-52L |
1 x | |
2 x | 12 mm floating pad (49 pcs) |
1 x | PYRO 800-40 Long Axi |
1 x | KIRA 500-26 6,7:1 |
1 x | PYRO 750-50L Competition |
1 x | KIRA 480-26 5,2:1 |
1 x | KIRA 600-22 6,7:1 |
4 x | Aluminium wide washer M4 Red (4 pcs) |
3 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | 5 mm Prop Adapter M8 |
1 x | 10 mm Prop Adapter M12 |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | 3.2 mm Prop Adapter M8 |
1 x | KIRA 600-16 |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
3 x | Blind nut M4 (4 pcs) |
1 x | KIRA 480-38 5,2:1 |
2 x | PYRO 750-50L |
1 x | KIRA 480-43 |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | KIRA 480-38 |
1 x | KIRA 600-20 |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | KONDOR 15-92 |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | 5 mm Prop Adapter M8 |
3 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
2 x | Z Spinner (CN) 30mm |
1 x | Spare white 38-45 mm spinner |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | White spinner propeller pleg. 42 mm / 5 mm |
1 x | Spare white 36-38 mm spinner |
1 x | White spinner propeller pleg. 42 mm / 6 mm |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Spinner propeller pleg. 33 mm / 5,0 mm |
1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Z Spinner (CN) 35mm |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | Z Spinner (CN) 42mm |
1 x | Propeller electric carbon 10.5x6 |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | DPSI V-Match |
1 x | 1/12 Pilot "Fighter" |
1 x | AXI 2217/12 V2 |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Motor A50-16 S V4 |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | SWTU2 switch |
1 x | Snap short M2 (10 uds) |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | "Taxi Tank" Fuel Tank |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Air pressure gauge |
1 x | Crimping tool |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Flat washer 1.7 mm (20 pcs) |
2 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | SERVO DES 806 Pignons |
1 x | AX-60 starters (5 pcs) |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | Adapter lead MPX/XT60 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Canister combo DLE 120 cc |
1 x | 8 mm Adapter for AXI53xx |
2 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
2 x | 15x7 tree blades propeller |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | 11x7 tree blades propeller |
1 x | Horn 5/15 with M2 Bearing |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | Silicone black 1,5 qmm wire ( 25 m) |
1 x | Quicklock washer 3 mm (10 pcs) |
2 x | Initior Transmitter FTX2 Wireless |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Bags wings/rudder ODYSSEY |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | 1/10 Pilot "Jack" |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | 10-15mm Servo Arm |
2 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Carburetor DLE 170M |
1 x | Gasket set DLE-55RA |
1 x | Racor 4/3 mm |
1 x | Selfstarr EME35 |
1 x | Check valve quick hose connector 4-4 mm |
1 x | CILINDER FOR DLE55, DLE111, DLE222 |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | DLE Ignition 111/120/170 |
1 x | DLE 85 Ignition unit |
1 x | DLE Ignition 170M |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Quick hose connector 3-3 mm |
1 x | DLE 111 Carb gasket (V1) |
1 x | GASKET SET FOR DLE40 |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Tail boom brace LOGO 480 |
2 x | Motor ST 7-160 B |
1 x | Astra wing Joinner (Top Model) |
1 x | Tap FESTO 6-6 mm |
1 x | Program Card KAVAN ES |
1 x | Motor DLE 60 cc Twin |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Motor SAITO FG-61 TS |
1 x | Motor Moki S 500 cc 5 cylinders |
1 x | Motor Saito FG-14, 13,47 cc |
1 x | Motor GAUI F-50R (rear intake) |
1 x | Carburator Moki S400 |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | FUTABA T10 J T-FHSS |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Program Card G2 RAY |
1 x | Tool for entel |
2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt) |
1 x | Avanti S 1.8m Jet RED Style |
1 x | Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt) |
1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
2 x | Parachute expulsion foam |
2 x | PCARD Wireless System |
1 x | Slider Extenion for CORE |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Blue smoke canister 100 g |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | PYRO 600-11 |
1 x | Central piece 42 mm + 5º |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | TARANIS Q X7 |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Switching module high voltage SXH |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 12x10 Electric |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Propeller APC 11x5.5 Electric |
1 x | ESC YGE 120 LVK |
1 x | Male connector for 6 pines AWG |
2 x | Servo MKS HV6120H |
1 x | Lock nut M5 (10 pcs) |
1 x | Gear for D 54 |
2 x | Propeller APC 11x8 Electric |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Threaded insert M6 (10 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Nylon Screw M5x30 |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Propeller APC 11x8.5 Electric |
1 x | Propeller APC 10x10 Electric |
1 x | cable TexY |
1 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | Gear for D 200 BX |
1 x | Propeller APC 12x4.5 MR |
1 x | Flybar support metal LAMA |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Screw M2x8 (10 pcs) |
1 x | Conector JR Servo female (50 pcs) |
1 x | Conector XT-30 (hembra) |
1 x | Conector MR-60 (pareja) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Propeller 12x6 Falcon electric |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Rudder forward 70x28 "type Kato" |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Receptor FUTABA R3106GF T-FHSS |
2 x | Foam plastic plates (310x210x5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
2 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | 6 mm M3 variable horn |
1 x | AXI 2808/16 V2 Long |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
2 x | CA Glue (medium) 20g |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Horn 6/35 with M3 Bearing |
1 x | Siesta T tail (Topmodel) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Ion Pro, Wing joiner (JP Model) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Ka 8 B (Top Model) |
1 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
1 x | Q-12 X-light 2000 mm Electric |
2 x | Spray YELLOW Inca Lexan 150ml |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Decorative caps, multicoloured, short |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | 3 mm Prop Adapter M6 |
1 x | wooden stairs (kit) 70 mm |
1 x | Top light Red 10mm/3V (2 pcs) |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | TWIST planeador gomas |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | LA500 tail empennage |
2 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | LA500 housing-lower cyclic |
1 x | Screw M3x30 (10 pcs) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | F4U CORSAIR 2360 mm |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | F-16 Falcon Black Knights 1:6 (1630 mm) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Central piece 47 mm - 2,5º |
1 x | KIRA 480-31 5,2:1 |
1 x | PYRO 800-48 Long Axi |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Spinner red 36-38 mm |
1 x | A50 Motor Mount Alu complete set |
1 x | Futaba 38 mm servo arm |
1 x | Spinner black 36-38 mm |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Capstan of plastic 91x44x45 mm |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Servo BLS-M55B 61.2kg |
1 x | Canister combo DLE 55 cc |
2 x | SunCover 110/120/140 Class (SebART) |
1 x | KatanaS 50E, Landing gear WHITE (SebART) |
1 x | Servo digital 17g MG - Std |
1 x | Tubo espiral FESTO 6x1 Black |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Hose stopper 4 mm |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Servo BMS-4112 |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Motor DLE 35 RA |
1 x | Motor DLE 130 cc |
1 x | Motor DLE 55 RA |
1 x | Motor DLE 65 cc |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Motor DLE 61 cc |
1 x | Albatros red/white (Top Model) |
1 x | Motor DLE 111 cc |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | KatanaS 30E YELLOW/BLACK Tail Set (SebART) |
1 x | FUSELAGE STAND MINI AVANTI EDF/JET |
1 x | Mini AVANTI S Jet , Carrying bags (SebArt) |
1 x | Avanti S, Cockpit sunCover (SebART) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | KatanaS 30E WHITE Landing Gear(SebART) |
1 x | Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt) |
1 x | Sensor telemetry FUTABA SBS-01C |
2 x | Sukhoi 29S 140" 3D Monster YELLOW/BLACK (SebART) |
1 x | Sukhoi 29S 50E V2, Red Motor Cowl(SebART) |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | Sukhoi 29S - 2.2 m, Yellow wheel pants (SebART) |
1 x | Receiver FUTABA R7108SB FASSTest/FASST |
2 x | SunCover 2.6 Class (SebART) |
1 x | SunCover 50 Class (SebART) |
1 x | Robart Door Hinge (Pk2) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | DJI FPV Combo |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
1 x | Sebart 2.2 m WHITE/BLUE (SebART) |
1 x | Set EDF Mini Avanti Full Aluminium |
1 x | MythoS 50E White/Blue |
1 x | Set wings Mini AVANTI S 1.4m W/B/R |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Servo FUTABA SBL 471 SV |
2 x | Sebart 30E YELLOW/BLACK, Cockpit(SebART) |
1 x | Receptor FUTABA R7006SB FASSTest/FASST |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | SEBART 50E V2, Wheel pants white(SebART) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Set EDF Mini Avanti Full Aluminium |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Support 45% Hopper JetsMunt |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Propeller APC 7x6 Electric |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Cockpit latch closing I=10 mm |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Mitsubishi ZERO AM6 91 ARTF |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Turbofan 1000 |
1 x | 12x6 tree blades propeller |
2 x | BALSA triangular 6x6x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Ventilador (metal dorado) 15 x 34 mm, 2 piezas Ø 15 mm x 34 mm a |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
2 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Epoxy 5 min. 500 g (Resin) |
2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
2 x | Screw M3x5 (10 pcs) |
1 x | Rotorhead pushrod |
1 x | Long pinned hinge (12 uds) |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Sukhoi 29S 140" 3D Monster WHITE/BLUE/RED (SebART) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Pinion 18 - 3,2 mm |
2 x | Propeller APC 10x6 Glow/Gas |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Propeller APC 11x4.7 SF |
1 x | Battery charging cable XT60 |
1 x | Servo MKS HV 777A+ |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Servo MKS HV69 |
1 x | Propeller APC 10x5 Electric |
1 x | PCI-HV ignition conversion set with Zenoah rubber plug cap for Z |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Hopper 125 ml XICOY |
1 x | Propeller RABOESCH M3 30 mm (4 Blades) (Left hydropropeller) |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | Propeller APC 9x6 Electric |
1 x | Long horn 50x26 |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Balsa panel 10x100x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
2 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Sparkplug DLE CM6 |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Release wax 250ml |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
3 x | Universal Colour Paste deep black 50 g |
2 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
2 x | Glass fibre sleeve Ø 20 mm |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | CA Glue fast 20g |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Piñon motor rotor LA-500 |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | Screw M3x8(10 pcs) |
1 x | Wheel 28 mm |
1 x | Frontal support Speed 600 |
1 x | PT 20x13 EL Propeller |
2 x | Circlik for shaft 3.2 mm (10 pcs) |
2 x | Screw M3x16 (10 pcs) |
2 x | Pan head screw M2x16 PH |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Power MULTIlight |
1 x | L ELBOW 90º ø 25 mm |
1 x | Foil for sticking flaps and ailerons |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | PT 16x10 E Propeller |
1 x | Spinner propeller pleg. 45 mm / 4 mm |
1 x | Screw M4x30 (10 pcs) |
1 x | Socket Screw M3x9 mm |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
2 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Socket Head Screw M2x10 |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | EXHAUST STACK Ø 25 mm DLE 55 RA / DLE 61 |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Oracover Red 2 m |
1 x | Manual Controller |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | Screw M3x12 (10 pcs) |
|
277,609.46EUR |